Mag from scratch?

[p8ntfreak98]

Ok i was looking to get a new gun. I wanted a mag for a while, they look cool. But heres my question, could I just buy the following and put it all together and have it work??

Blade Intelliframe
ULE Body
Barrel
Drop
Level 10 bolt
Sear
Body rail(where can i find?)

What else would I need?? (besides like N2 and a hopper)

[sniper1rfa]

you forgot the gun...

you need to buy a valve (x-valve or classic valve). if you go x-valve, you need not buy a level ten kit.

[p8ntfreak98]

http://store.yahoo.com/actionvillage/011-1000-015.html

would this be it??

[Python14]

No, that would be an aftermarket(read: warranty voider)on/off valve...what you want is the whole mass of guts. If you want to build a mag, talk to Tunaman. He is the guy who can help you the most.

[SIGSays]

contact RogueFactor he has everything for cheap!...

[�.C.]

air hoses and fittings
thumb strip screw
front grip screw
sear assembly
valve body with reg

[Hexis]

The "Valve" in a mag is really an on/off assembly, dumb chamber, power tube, bolt, regulator all in a housing. The X-Valve is all aluminum and the best thing avalible. It will only work with N2/HPA. The other option is the classic valve. It's similar, but made of Stainless Steel so much heavier. It also is slower to a slightly different design.

The "Valve" is the guts and all the really important parts in a mag.

Here is a link to the X-Valve on airgun's online store:


X-Valve

The X-Valve comes with the level 10 setup, so no need to add that.

[p8ntfreak98]

hmmm.....this should be interesting, i need to find the 'guts' of the gun now.

[stondroopy]

hehe i asked this same question a few weeks ago under the advice i got i bought a used mag and am building up from there.

[Jeff_PbDaddy]

You mean like this?

I call it the "ULEX"

Jeff

[Jeff_PbDaddy]

You mean like this?

I call it the "ULEX".

Jeff

[sneakyhacker420]

Parts To Build A Complete Automag:



mainbody

body rail

valve

bolt

bolt spring

trigger frame

barrel

grips for trigger frame

vert adapter (optional)

foregrip (optional)

sear

sear pin

front frame screw

foregrip screw (optional)

quick strip screw

bottomline ASA

bottomline screws

air fittings

air hoses

hopper

tank

o-ring rebuilt kid (suggested)

paintball gun oil (MAGS LOVE OIL... YOU NEED IT!!!)

[Torbo]

i would suggest talking to tunaman to built you such a thing. Id be easier and probably cheaper too.

[Darkstorm]

"ULEX" - Cool

That is almost the exact same gun as I built including the system x drop. Except my is all red. This gun ROCKS.


Two recommendations for this gun...get a AGD quick disconnect and mount it to the bottom of the hose where it connects to the drop....and add some shrink wrap pastic around the braided hose so it does not chaff the ULE.

"ULEX" - Like the name

[p8ntfreak98]

cool thanx alot sneakyhacker