So would it be a good idea to get a ULE trigger with a classic valve? Would it be worth it?
-
Graphite Fly 4
Silver Dust Angel Speed F/S
Good Traders: Joey D, Lord Whoopass, robertjuric, Sithos
My pbreview.com feedback
My automags.org feedback
www.otspaintball.com
www.paintballgiants.com
www.paintballinvasion.com -
that remains to be seen actually...Originally posted by Woogie12
So would it be a good idea to get a ULE trigger with a classic valve? Would it be worth it?
i might give it a go in my friend's classic...just for now until my retro can be milled...
if i end up doing that ill post my findingsTheDuelist "The problem is that Tom has developed the VW Beetle of the paintball industry. It's almost too good to change and far too reliable."Comment
-
once i get it, i wont even attempt to install it until i get level 10 running on my mag.. ill buy that once i get back from spain..
PBN Feedback AO Feedback eBay Feedback
DIRTY ROTTEN SCOUNDRELS (Rob Kenny and Matt Bradley) LIVE @ www.djinnuendo.com TUES 2/8 - 8 to 10PMComment
-
Yay!
Comment
-
Now I have to get a Y-Grip, a Warp-ULE, and this... Damn you Tom!
I'm pretty sure they will make more if it sells out if they turn out to work good.Classic RT - RT02667
Blade IntelliFrame
Dye Ultralight
http://TheHybrid.net/Comment
-
Can we look foward to a software update for e/xmags which will take advantadge of the ULEs lighter pull in better battery consumption or higher ROF?
NYX-Matrix/Mamba IR3
-----> Click the picture, do it!
PBnation
Impulse Owners Group (IOG)
E-mail
Comment
-
i have no $
Team Sandbaggers.
-We own j00 all.-Comment
-
hey, this may be a stupid question, but i'm not sure whether or not my retro valve has the 2 orings needed. Does the 2 orings mean the valve needs 2 orings inside the actal on/off assembly, or one inside the assembly and one outside???
thx-Black/Blue ND FreeStyle-
-Black/Blue Alias-
~Thanks to our 05 Sponsors~
Rexplex.com
Protopaintball.com
Nxepaintball.comComment
-
If your valve is an X-Valve or XRT-Pro valve it WILL work.
If it's a classic RT valve, stainless steel RT-Pro Valve or a Retro Valve, it will NOT work.
Take out your existing on/off assembly, if you see two o-rings at the bottom of the hole in the valve, then it will work. If not, you have a paper weight.
Evil Bob- Why did you order one for your Classic RT? Unless you're getting it drilled, you're SOL.Comment
-
k, thx for the info BlackVCG
oh well, guess the ULT wont work on my gun...damn single o-ring
-Black/Blue ND FreeStyle-
-Black/Blue Alias-
~Thanks to our 05 Sponsors~
Rexplex.com
Protopaintball.com
Nxepaintball.comComment
-
everyone seems to avoid this question but
how difficult is it to get it drilled out?
i imagine it has to be a flat tipped bit like a milling bit or something
but other than that...
just has to be the same size as the hole...drill until it's flush with the bottom hole...just can't go too far...
doesn't seem like a big deal...just do a little bit at a time until you're flush
all the sealing takes place inside the on/off assembly now so it's not like you have to worry about it sealing properly
and if it's off a hair...you have spacers to compensate...TheDuelist "The problem is that Tom has developed the VW Beetle of the paintball industry. It's almost too good to change and far too reliable."Comment
-
dangit. My parents say i cant buy it last night wait till tomorrow well tomorrow comes there out of stock... any idea when they'll be back in?
Comment
-
OUT OF STOCK!!!!!!!! Please tell me that more will be available in the future.Comment
-
I believe Tunaman had some too, try him.
PBN Feedback AO Feedback eBay Feedback
DIRTY ROTTEN SCOUNDRELS (Rob Kenny and Matt Bradley) LIVE @ www.djinnuendo.com TUES 2/8 - 8 to 10PMComment
-
Any know when they will come stock in Xvalves(if they ever will)?Comment
Comment