well I'll try to help you out a bit. the only two guns that had working air assists that i know of where the shocker and angel, i think i may have seen a timmy but not sure. anyways, the way it works it used the air that is used to cycle the solenoids after each cycle. the shockers came out of the side of the gun, and the angel came out of the top. the shockers was routed up through and out the side. and the angels was tapped directly into the solenoid and thus voiding your warrenty everywhere exept adrenalin being though they were the only people who did it.
after all that they shockers supposedly worked a little better than the angels since the solenoids work at 180 psi at compared to angels at aprox 90psi.
and just in case you didn't know the hose is routed from the gun(where ever on it) it the angled part of an elbow or at an aprox 45* angel in vert feeds.
anyways, its been proven that they do not work enough to be noticable.
well hope that helped you out a bit. later AZZKIKR
after all that they shockers supposedly worked a little better than the angels since the solenoids work at 180 psi at compared to angels at aprox 90psi.
and just in case you didn't know the hose is routed from the gun(where ever on it) it the angled part of an elbow or at an aprox 45* angel in vert feeds.
anyways, its been proven that they do not work enough to be noticable.
well hope that helped you out a bit. later AZZKIKR
So, think there is a market for coiled cocker hose, in the paintball world that is?
Comment