Slide Check + Macro

[afrankart]

I was wondering if any of you have used a slide check successfully with a macro setup? I was also wondering what brand you reccomend. I am currently having some bolt stiction problems with my ULT setup and I heard that this is an easy and quick remedy to reset my bolt without having to take off my hopper and reset the bolt manually.

[GT]

pro connect. I had a thread about this about a month ago. do a search guys posted lots of different setups using slide checks and Q/Ds.

[TheJester]

the only thing you would have to find to make it work with macro is a straight elbow. i would recomend an ACI slide check if you decide to get a slide check and not a pro-connect. and make sure you get one with a quick dissconnect, it makes life easy when de-gassing for storage. if you don't have, or can't find a straight macro elbow, PM me, i have 1, but i use braided hose, so i would be more than willing to part with it. notice i said part with, not sell

[Prezents]

macro/slide check

Here is how I have mine set up and have had no problems with it.

[Prezents]

fittings

you can see that I have 1 90 macro fitting and one straight fitting to go into the slide check.
Coming out of the slide check I have a female quick disconnect and going to a male QD to a 90 in my valve.

[Prezents]

Bolt stick

Another way to correct bolt stick it to hit the back of your valve with the plam of your hand. (not to where you knock the marker out of your hand!)
and it will come back.

[afrankart]

I do have 1 straight elbow that came with my CP foregrip. Thanks for the offer though, I really appreciate your generosity, Jester.

[TheJester]

no prob