Z-man ripping on the RT (Movies)

[Chojin Man]

so to sweet spot an rt all you have to do is jack up the air pressure? Do you have to modify your sear or trigger to sweet spot? The reason why i am asking is because i have a classic mag with a ReTro valve. Would it be possible to sweet spot that by just turning up my air pressure? Does turning up the air pressure have any adverse effects over time on your equipment?

thanks
Chojin Man

[ZAust]

Originally posted by xXhAppyAznXx
what rule?!

well, now they wont allow "sweet-spotting," at least not with mechanical guns. although im sure they look right past the timmys and trixes with crazy trigger bounce.

[FutureMagOwner]

eh i could do that on my emag before i made a little adjustment with just a preset PE tank i dont think adjustable is a requirement really its just finding how to do it (which people can only sorta show you)

[hAppy]

Originally posted by ZAust


well, now they wont allow "sweet-spotting," at least not with mechanical guns. although im sure they look right past the timmys and trixes with crazy trigger bounce.

thanks for info, thats bs! o well

[s.centralpirate]

nice vid Z-man!

I too have a classic RT w/Z grip that just lays them flat. Although I am stuck without a adjustable right now, but even with a preset I can empty a hopper faster than I can pay for it!

[Fixion]

Originally posted by sps16
damn, need quicktime, this better be worth it guys

Get Quicktime Alternative, the good part is its not made by an evil company... Man I hate Quicktime...

[Z-man]

Originally posted by Tunaman
That Macroline on that gun is too short. Dangerous situation there....

Too short? for what? do they tend to burst when they are short? The idiot thing does leak though...

Originally posted by Chojin Man
so to sweet spot an rt all you have to do is jack up the air pressure? Do you have to modify your sear or trigger to sweet spot?

http://www.automags.org/forums/showt...hreadid=105646

Originally posted by FutureMagOwner
eh i could do that on my emag before i made a little adjustment with just a preset PE tank i dont think adjustable is a requirement really its just finding how to do it (which people can only sorta show you)

Yes but could you do it in mechanical mode or hybrid? You can pull off a 20 bps full auto with the hybrid mode on the Emags as there is no pressure like what you have in manual mode and only the bounce so its easy. You really do need an adjustable tank for a Mech. RT valved Mag (read the link I posted )

[FutureMagOwner]

ill do it if you want in manual mode on my emag (i just need a hook up for my digi cam and ill do it ) believe me i can do it with a preset

[Z-man]

hmmmm wonder if your sear pin is worn down then... typically they don't do that unless you either sand down the sear pin (big nono) or because of use it has just worn down. But I'll take your word for it; you might want to grab some calipers though...

[NiteWolf1138]

I got an XValve for my Classic Mag, and I was able to get various bounce affects just by changing the LvL10 carrier size. Sounds something similar, all I have to do is hold my arm stif and put enough pressure on the trigger to get it going, the the whole thing shakes back and forth at a fairly nice rate. Wish I could get it on film tho, but I don't have a way to tape it .

[Shadow33]

Z-man's how to rapid fire post

your post on rapid firing seems to be gone as i had it bookmarked for reference and now it will not allow me access to it so you might want to check this out

[Z-man]

My "How to Rapid-fire" post was closed by a moderator. The reason is listed in the final post. I think it's still here but since it cannot be added to it will eventually die. I have it saved in Word though... it will never truly die!

EDIT: hmm I see it's completely gone now... that's a shame, nice post too.

[Butterfingers]

What was the reason... Briefly... Im curious...

[Z-man]

the reason given was that rapid-fire is a malfunction of the RT valve and causes premature wear on the valving. Thus, showing people how to do this is not apropriate.

[Butterfingers]

Not only that I think from what I recall there was a tremendous liability issue that rapid fire dealt with.

It was the way it was with the e-magnum and my retromag.

Thats why I chose to keep silent on the details of my retromag... It was cool to see and I worked great as long as you knew what you were doing.

But if some kid were to try and replicate this and he didnt know what he was doing he could have a REAL uncontrolable runaway problem... Sombody gets shot in the eye and AGD gets served with papers. Especialy since he got it from an AGD sponsored site.

Eventhough AGD could win in court the legal fees would be astronomical.

You cant idiot proof everything... I mean today it is all about litagation... Lawyers are getting fatter day by day...

We live in a time when a woman can sue Mc Donalds for burning herself while driving with coffee in her lap.

Gee really Coffee is HOT?!?! Why didnt you warn me about this I didnt know?!?!

You mean your not supposed to put the cup in between your legs and floor it?!?!?!