NEED HELP WITH ACI 6 STAGE x-CHAMBER

[laxster08]

ok i got just an ACI 6 stage x-chamber...and i have an automag classic...and it has a vertical adaptor..how do i hook up the 6 stage b/c its not screwing in like people todl me it woudld..it wont fit..its wierd please help thanks

EDIT:i just found out that the previouse owener of it had a spyder...will that make a diffrence? thanks

[xadamx]

the spyder wouldnt matter. it should screw in... make sure that all the treads are fine.

[laxster08]

its diffren't thread...it has 5 straight sids then like a trinagle at the top with like small threads...its real wierd...and i think that comes off but i am not sure

[thecavemankevin]

ok, not a 100% sure about your expansion chamber but the way they typically work is you will need a verticle bottle adapter. This is an adapter the attaches to the front of the bottom part of the rail in front of the trigger guard. It is a female adapter that will allow you to screw the male end of your ex chamber into it.



find it here in AGD's store

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=215&CATID=6

[laxster08]

i know that but what is it is...its not liek the thread at paintballgear.com...the one i have hte thread is diffren't then the pic..so i think they put someoneting on top of it..what i'm basically askin is how do u get it off...thanks

[Thordic]

Spyders use metric threads generally, they are non-standard in almost everything.

I don't know if they have non-standard VA threads, but I wouldn't be surprised.

[Hexis]

Does it look like this?




Perhaps the Spyder Vert ASA is still on there.

[Spray Painter]

Originally posted by Thordic
Spyders use metric threads generally, they are non-standard in almost everything.

I don't know if they have non-standard VA threads, but I wouldn't be surprised.

i'm pretty sure the VA threads are the same, otherwise Kingman is retarded

[xadamx]

Originally posted by Spray Painter


i'm pretty sure the VA threads are the same, otherwise Kingman is retarded

key words

[GaryWV]

The kingman threads are exactly the same as all other VA threads, they only use metric screws on their markers, and offset holes...weirdos.

[fastpitch321]

Kingman's run on metric measurements, mags don't. The size of the whole youa re screwing into may be a slightly different size.

[GaryWV]

Once again, the VA threads are the same on a mag and spyder.

[banzaimf]

ASA threading is standard

[Infratracide]

dumbass kingman tryin to get everyone else to follow their metric measurements, they think they own the industry!
NO kingman, you suck!