POLL: Level 10 users, which sping and why?

[SIGSays]

i used the stock lvl 7 spring.. it was the only one that would shoot back when i had my minmag... i still have to tune my new mag

[Peach]

300 fps I use middle, 250-280 fields I use short.

[BlackVCG]

I use the gold spring in all of my guns and all of the E-Mags I built for my team guys run the short spring. I never have paint issues in game situation. When I'm screwing around, which is all of the time, I can break/chop a few here and there.

The most important, yet overlooked part of Level 10 is the o-ring fit. The loosest fit is the ideal fit. You have to keep adjusting it until you can get it such that you can drop the bolt from the top of the powertube and it should come down and hit the bumper under the force of its own weight. Each o-ring is different and you can be too tight with say a 1.0 and switching to a 1.5 causes leaks. In that case, that o-ring should just be used as a reg. seat replacement and you should try another o-ring for the LX. I have a few tricks to get the bolt piston and o-ring to glide like butter and after doing these, I have never had any issues with Level 10.

[wobbles82]

I use the shortest spring. Why you ask? Because I broke my middle spring at NPPL NJ. Works great though, no chops, no chops with the middle though either. Although MY MAG DOESNT WORK RIGHT NOW, I wish somebody could help me...

[Mag Master 04]

why not longest

softest and we all know the rt technology needs that extra TLC on that paint