Will this damage my emag internals?

[Skoad]

Well fooling around with my emag i was gonna practice walking but i couldn't hear the noid click over my fingers slappin the trigger.

i found that if i take off the body, valve, rail and left the sear sit on top, if i push down the back of it and pull the trigger it makes a louder click sound.


if iwere to put a very small and weak rubber/elastic band over the top of the sear and have the bottom catch right where the twist lock goes....could i dry fire it without screwing up anything?

[adam shannon]

i find that with the safety on you can hear the clicks better..even if the marker is still fully assembled.

[Skoad]

yea just goofing aroudn with it, i found that if i pull the trigger, then flip the safety on if i point the marker down it makes a very nice click, if i hold it up in the shooting position i can barely hear it.


right now i have just been taking the valve off and sticking my finger in the body and pressing down on the on/off part of the sear (the little square).



i found that i can't walk worth crap....

[Hoplon]

My trigger frame got warm fast when i tried that so i don't do it any more.

[the123]

the solenoid will not be hurt by doing that. in fact, the rubber band method was shown to people by TK who attended the Super Tour/Tech Class in 2001 @ AGD.

[Skoad]

hoplin, i think it just gets warm because electronics heat up when used.


the123- cool thanks, and i thought i came up with it first

[ntn4502]

flip it upside down, and the saftey on, probably put on 20k from just that

[Skoad]

yea i've put on a good 10k doing that, but you cant hear it when you hold it up like to your shoulder like your playing.