Hey guys, I sold my Omen a while ago and am getting a viking for now, but the furure is ahead of me, I plan on getting another Omen next year. Here are my Plans for the best Omen ever:
-Stock Omen
-E-blade, not the Kit, I'll get a raw body with No board, 4 way noid, and eyes. All I need is the Frame, sear and noid, and the trigger assembly. Yes i can get it moded to work on the Omen.
-Morlock Baord, this gives me unlimited ROF selection and Modes of fire to test a high ROF. plus no complicated stuff from the e-blades stock board.
-Open Face bolt...just widen out the stock.
-Volumizer, I can dremel out the end cap, give a little more room in there.
-All Anoed red to Black fade with the Red ending in Solid red Blood drops into the Black solid anoe.
-Any upgrades avalable at the time.
-Maxflow HPA system
-red to black Pipe or Longbow barrel.
-Halo B, properly adjusted, or I will get a hold of some Metal CAM paddles from EPO if I can.
-Maybe dremel out the valve to make it higherflow, but thats not likely.
-Testing, Put recock all the way in and cut into the valve a little so I can tap a hole for a LP hose. Drill into the front end cap and install a LPR Impulse style, then run a LP hose to the Elbo that is in the tapped hole in the valve....adjust till gun will recock.
What do you guys think...I know lots of money and work, but It should not cost to much more then a grand.
-Stock Omen
-E-blade, not the Kit, I'll get a raw body with No board, 4 way noid, and eyes. All I need is the Frame, sear and noid, and the trigger assembly. Yes i can get it moded to work on the Omen.
-Morlock Baord, this gives me unlimited ROF selection and Modes of fire to test a high ROF. plus no complicated stuff from the e-blades stock board.
-Open Face bolt...just widen out the stock.
-Volumizer, I can dremel out the end cap, give a little more room in there.
-All Anoed red to Black fade with the Red ending in Solid red Blood drops into the Black solid anoe.
-Any upgrades avalable at the time.
-Maxflow HPA system
-red to black Pipe or Longbow barrel.
-Halo B, properly adjusted, or I will get a hold of some Metal CAM paddles from EPO if I can.
-Maybe dremel out the valve to make it higherflow, but thats not likely.
-Testing, Put recock all the way in and cut into the valve a little so I can tap a hole for a LP hose. Drill into the front end cap and install a LPR Impulse style, then run a LP hose to the Elbo that is in the tapped hole in the valve....adjust till gun will recock.
What do you guys think...I know lots of money and work, but It should not cost to much more then a grand.
member# 13650
Comment