extreme bodies for 68 mag?

[renegade2k]

can u get an extreme body for a 68 mag

[magman007]

yes, you can. All you would need to retro fit an extreeme body to a 68 automag is an rt on off valve, and an rt sear/ pin combo. If you install that into your gu, all you would have to do is slide your valve in and bolt on a triggerframe of your choice

[renegade2k]

so i need an rt on off and a rt sear on my standard valve?

[magman007]

exactally, get that and your all set! and maybe an intelli frame to round it all off!

[PaInTbALL zAcH]

what if you have a retro vlave? do you still have to replace the parts with Rt or does it alredy have RT

[magman007]

you satill need an rt sear, the sear is different from the 68 and minimag to the rt/rtpro/e-mag. In the e-mag there is a ball bearing system instead of the sear and sear pin system. So you would still need an rt sear assy. if you had a retrovalve in ur mag

[Dave]

also don't forget an Autococker-threaded barrel to go with the body...I think it will have those those threads...AGD?

Also, I started a thread on the same thing...I'll try to find it for you.


-Dave