My Warped Mag!

[TSalPaintball]

Hey,
I fanially got a pic of my gun, it isnt anything special just thought I would post it!

[�?�� �m���]

Hey nice gun tsal, its nice to see you have your warp up and running thats awesome!!! (after giving you hints where to put the hose ) i was wondering? does your bullet drop forward on/off asa give you any trouble? mine seems to leak when ever i screw it in i think its the oring on the on/off but i cant seal it.

[TSalPaintball]

Thanks man, Yes mine did leak, but I replaced the o ring with a new power tube o ring, also did you seal the gauge plug?

[TSalPaintball]

Here is a smaller pic!

[Caffiend]

nice setup, i really like the barrel condom (I have the same one)

[TSalPaintball]

thanks man

[�?�� �m���]

well i was playing with it today and i oiled the on/off piston and put grease on it lol it held up for a few games i think it the piston oring it keeps leaking lol i think im gonna go find a new oring , ya i sealed the gaugeplug already . its just the stupid piston other wise , my gun works awesome like a mag should

[Paintchucker]

Nice setup! One thing you might want to try is running the warp hose underneath the trigger guard, rather than in front of the foregrip. I found that much more comfortable to play with, but I had a double trigger, which keeps the hose a little more out of the way of your fingers.

[arsonpaintball06]

HEY TONY UR AN IDIOT.......WHEN I GET WARP MY GUN WILL BE TWICE THE GUN URS IS.....MUAHAHAHA LOL JK MAN.....PBALL THIS WEEKEND WOOHOO

[TSalPaintball]

try replacing the on/off piston oring with a new power tube o ring it worked for me!

[-=Squid=-]

What are the specs on this beast? Did you cover the gun up with the warp on purpose

[UltimatePaintballer]

very nice but i would get the hose to go through the front part of the hopper

[TSalPaintball]

Heres the specs:
Automag Classic p/f left, 12in All American, clear warp, smoke 12v revy with x-board, dead-on bullet frop, benchmark fore grip, pure energy 48/3000 (sold now being replaced with centerflag hyper 68/4500)

AS for the warp hose I have powerfeed left so the hose must be run to the othere side of the gun, therefor I run it in the front, because if I was to run it under the trigger frame it gets in the way of my hand, but when it is up front its out of the way. Also it is connected to a 90 Degree on the powerfeed.

[CodeMA]

...warp setup

very nice.... I acculy need a longer hose...but right now I have mine setup like this....



Its P/F left aswell...



anyway its possible to do it otherwize...however I do like your setup...I just need a longer warp hose....and possibly a new hopper ;( but anyway...eheh it is possible..it involves addapters though....

[Caffiend]

man, i would LOVE to play on grass. stupid desert....