can the ACE BOARD be added to regular emags?
-
:jester: Team Sideshow :jester:
My setups
*Emag,X-valve,No-rise, Freak,flame drop,Eggy II, Bulldog 68 3000
*PumpMag,Standard left feed,Stock Barrel,Stock Frame,VL-200,DZ-stubby
*Tribal Twister, Freak, DZ-2
CHROME MICROMAG RT.FOR SALE -
Not without some serious milling on the grip frame, rail, and body.
-Evil Bob -
You'll also need to get the xmag software loaded into your board or write your own.
Here's a few threads with pictures....
NVE-Mag Tech Pictures
Aced Emag
Comment
-
Will AGD install the ace board in an emag and upgrade the software?
Is the board in the emag the same as the x-mag?
Is someone else providing this service?Comment
-
No (though they *might* upgrade the software if you ask)
Yes
Not that I know of.Comment
-
Yagr...thanks for the answers. I saw your install thread. That took some b@lls to do.
I am thinkin about trying it.Comment
-
I've been running an X-Mag for some time now and I've yet to even turn on the ACE. I haven't needed it with the Lvl X.Comment
-
My motivation is mostly to have a switch on my marker and the ace is a 'cuz I can' byproduct. I will probably play with it at first then never use it....especially since I use a warp.Comment
-
If you just want the switch, Kayle installs them in regular Emags. He did mine at IAO.
It's $35 or so and he drills a little hole in the gripframe. All done.
Easier than trying to get all that done.Comment
-
And it looks really goodOriginally posted by Dayspring
If you just want the switch, Kayle installs them in regular Emags. He did mine at IAO.
It's $35 or so and he drills a little hole in the gripframe. All done.
Easier than trying to get all that done.
Taking a long needed leave of the sport to finish school and tour the country
b2k3w/pds, vaporized, vapor valve, aka sidewinder, chaos chip, palmer rock lpr, CP barrels, 68/45 hyperflow
B2k3 w/pds and bunch of upgrades for saleComment
-
I remember a bumch of threads saying that there was no such switch. It could not handle the amps and would eventually burn out. Is there no a miricle switch? If so I'm on it.
Is there a picuter on the switch/installation/fininshed product?Comment
-
-
yeh, Kayle was showing his board/switch to me at IAO. its hot
Highly recommended for Emag users (wish AGD would install it factory)
Comment
-
how hard is it to get the software upgraded and is it free?
I getting a cnc milling machine should be here monday too so i'll be able to do this.:jester: Team Sideshow :jester:
My setups
*Emag,X-valve,No-rise, Freak,flame drop,Eggy II, Bulldog 68 3000
*PumpMag,Standard left feed,Stock Barrel,Stock Frame,VL-200,DZ-stubby
*Tribal Twister, Freak, DZ-2
CHROME MICROMAG RT.FOR SALEComment
-
when AGD releases 3.0, if you send it to them, and pay shipping back, they should flash theboard for you for free. They do it free at tournies they attend aswellComment
Comment