my custom milled mag

[-=Squid=-]

Originally posted by misfit
p.s. its not milling if it's done with a dremel

PS...who cares, its still super sweet

[studley192]

yea it was just a junkie stock rail. All of my friend were like " dude you are going to mess your gun up so bad" but i just figured a new rail cost 30$ so why not do it.

The milling took me real long (like a week, i milled like 2 hours a day) when i did one side. I used a grinder and the dremel tool, with some cylindrical tip. Then i broke my dremel because i turned it on full power and stabbed it into a wooden bench because it was cool when the wood smoked. I borrowed my friends dremel, and he had a ton more tips than i had. So i found one tip, and it was very efficient and i got done in 2 hours what took me a whole week. The polishing took forever, though. I just took some sandpaper and such to work and polished it the whole time when i wasnt doing anything.

I had to wear heat gloves if i did it for extended amounts of time, because the body rail got really hot. Another huge problem was the metal shavings everywhere. I wore saftey glasses ( A MUST) and somehow i still got a peice in my eye. I also had a ton of little metal splinter everywhere, and my skin got all irritated, but a shower cured that.

My next job is a sluggo body, but not for a long, time because i just bought a ULE. If anyone wants a pic of the dremel tip i used, i'll take one, so you know what to use.

[redlaser666]

Exelent job on the rail. Please take a pic of the dremel bit you used, i have quite a few of them and i would like to try something similar.

[gibby]

Re: awesome

Originally posted by nouseforaname
cool you milled soo much that you turned a PF body to a ULE vert body! how in the heck did you do that ... jk really good stuff tho

DARN! Beat me to it!

[MantisMag]

that dremel is pure magic.

[UltimatePaintballer]

ummm

part of me wants to say you didn't mill that and bought the parts cause i have seen them all before, but if not hey good job

[dyeforever]

could u email me more pics of your rail. like the inside and the front. thanks

ps me email is [email protected]

[xadamx]

good job man. looks great

[Tunaman]

what are you gonna do when the back of your reg unscrews by itself because you wiped out the z-lock pin cavity? For safety's sake, make sure you drill a set screw in there or something... A+ on the effort though...real nice job!

[fcpchop]

thats awesome, how much does it weigh?

[sneakyhacker420]

very nice!


i wish that i was that crafty with my dremel

[studley192]

the z lock is still in there. I made it so i still had it in the left tail prong thing. The field strip screw hold stuff tight anyway.

[dyeforever]

i started on my rail. looks a lot like ur but only four flames. it alright if i can use ur idea?:) my still in the works and need to be annoed.

[coolcatpete]

That is pretty sweet.
Pete.

[studley192]

post the pictures of your rail here when you get it done.

my gun weighs

2 1/2 lbs without barrel, hopper or air
2 3/4 w/ barrel (dye ultralite)
6 lbs
with hopper ( ricochete) air ( 68 3k nitroduck old peice), and barrel

my other mostly stock mag except a level ten and drop weighs
3 1/2 lbs (with barrel)

my brother pirahna weighs
3 1/4 (w/barrel)

and for fun-
3/4 ( ricochete hopper)
7/8 ( Empire Reloader hopper)