How many spare parts do you carry

[Lohman446]

I was at a tournament away from the normal field the other week... well a couple of the regulars at the normal field came over to borrow tools/batteries from me. I was wondering, what do you all carry in the way of spare parts and equipment

I carry an X-valved mag for primary
One Smart Mag for backup
Both with ricochet hoppers, both with air tanks

6 to 12 9 volt batteries (imagine if I had an electric gun)
2 RT repair kits - unopened (for X valve)
One standard mag repair kit - unopened
Countless spare parts from previously opened kits
3 Allen wrench kits
2 spare bolt springs
2 spare bolts
One fully assembled classic valve (backup)
LVL ten extra parts
screwdrivers - philips and flats
Tylenol
Sudafed
Breath mints
3 extra pods in case mine break

My teammates tell me I'm obsessive, I tell them I'm prepared... am I wrong?

[afrankart]

I don't have a backup gun, I am shooting an X-valved, ULE-d, Ult'd, Omega rail'd, Intelli'd (Y-grip coming soon Thanks Tuna) mag. I have a Halo B and an Egg 2, but I still bring my VL 200 just incase. Now, for the extra parts. I have a classic parts kit I don't use, but it has come in handy for fixing other people's mags. I have a RT parts kit. All of the extra Level 10 parts. 5 or 6 extra level 10 springs cut to varying lengths. A complete allen wrench kit, shillips and flathead screwdrivers, a small wrench kit, 2 bottles of KC oil, some loctite and teflon tape an extra sear, my old level 7 bolt and power tube tip with spacers, my old on/off assembly with .750, .745, and .740 pins. I also carry about 10 extra RT bumpers and extra lithium batteries for my Halo and a few 9v for the egg. I have never had to use most of the stuff on the field, but if me or anyone else there is having a problem with their mechanical mag, the chances are good that I can have it fixed in a matter of minutes.

[tony3]

My shocker is all the extra parts I need, if my imp doesnt

work, I just wipe out it out, but I also have a whole box

of extra screws, springs, teflon, loctite, full screw

driver/plier set, lots of misc allen wrenches, a full

wrench set, some dow, and a few bottles of oil, oh yeah, a

few extra barrel plug incase i loose my sock(done it many

times)if anything goes wrong I can ghetto rig it back or

fix it

[Bad_Dog]

two words... Bucket Buddy

If a five gallon pail of extra parts wont fix it... I dont know what will...

edit: oops wrong pic

[shartley]

[RRfireblade]

Not a whole lot really......

Along with at least 3 back markers,none of which are really backups,I just like the switch around alot.

Jay.

[Kevmaster]

I almost always have two fully functioning (seperate air tanks, warps, hoppers) markers with me at the field. I carry all the parts that are possible to break (orings, seals, springs, wear parts) two times over and ten times more tools than possibly necessary....who knows...you might need a torque wrench or three phillips screwdrivers....

[FalconGuy016]

I have a toolbox full of tools for every imaginable situation, every sparre part I have for my mag, and stock power tube for my 98 custom.

3 guns total, 2 air tanks, 1 c02 tank, Halo and 12v, lots of barrels

[NJPaint]

I have a large tacklebox that holds hundreds of different parts and screws. Enough stuff to make a new mag, minus the body and rail. I assume that those two won't break on me

[RobAGD]

humm

Ok when I goto a tourny I carry the following:

1 fUgly Emag
1 Classic
1 Viking
3 FLatlines ( 2 68's 1 88 4500 )
3 halos

2 Morph Goggles ( 3 extra lens Amber, Clear, Mirror )
2 packs ( 4.3 redz cut for 11 tubes & 5.4 Redz cut for 13 )
15 tubes ( Fat Boy or JT , Dye )
humm 3 bags of barrels
1 Bipp squeege for my Halo
1 stick squeege
4 Emag batteries
12 E2 Photo Batteries AA's

3 sets gloves
2 beanies
2 head wraps
elbow pads Redz
Slider shorts ( JT & Dye )

Now for my Shomono Tackel box that holds 7 more smaller bins
All parts AGD has that I need. Every extra screw that are in ANY of the guns I carry ( AGD if the viking dies I play with the classic)

Every tool I need to take anything I have apart. and if there is a speciality tool I have 2. 2 Battery chargers 1 Car 1 wall ) 2 9v Java NiMH's for viking.

Dont forget the Paper towles, goggle cleaner, 2 trash bags ( 1 for trash 1 for clothes, a towle to wipe down with and a complete change of cloths for after I am done.

-Robert

[RRfireblade]

Originally posted by RRfireblade
Along with at least 3 back markers,none of which are really backups,I just like the switch around alot.

Jay.

I actually played against a whole team using my markers when believe it or not all thier markers failed for one reason or another.

Kinda funny really.......

mostly 'cause we lost........so I took all my stuff back and went home.......

Who's laughing now.

Jay.

[Pacifist_Farmer]

it might just be me, but i only take the velicty adjust allen wrench and the field strip one, cause if I bring anymore the RT knows it and then wants some attention

This way it allways works

[paintball8869]

This is what I have in my toolbox:

-4 strap wrenches
-2 adjustable crescent wrenches
-needlenose plyers
-plyers
-screwdrivers
-nut drivers
-full set of nut driver things
-2 allen wrench sets, plus extra loose wrenches
-blue loctite, red loctite, superglue, 2 part epoxy, teflon, electrical tape, batting tape (holds hoppers in real well)
-knives
-multiple air fittings, at least 10 of each (macroline straight and 90s, 90* nickel standard fittings)
-quick disconnects, proconnect, stainless hoses, macroline pieces, bottomlines, guages,
-multiple screws, all shapes and sizes.....ASA screws, drop screws (for rails), standard gun sizes, etc
-dremel
-soldering iron
-hacksaw
-spray bottles
-sandpapers (various grits)

Now for the intimidator parts:
-10-15 oring kits, cupseals, metric orings, ball detents, ram bumpers, eye orings (loose parts)
-red eyes, blue eyes
-ram sleeve, ram, poppet, poppet spring
-solenoid
-high flow barbs
-wiring harnesses
-ram caps
-spare regulator parts
-eye covers
-full set of screws (gz frame screws, clammy, body screws, etc)
-spare bolt, bolt pins, springs, screws, ball bearings


For guns and such, I go to the field and use my ripper intimidator, CP barrel kit, halo B, geddon tank. I have a backup Ironmen intimidator with a full setup (just pick it up and play).

[Mango]

I carry one of these when things stop working. A few wacks and she's good as new.




Honestly though, I carry a toolbox with the essentials. O-rings, lvl 10 parts kit, extra hose, TEFLON TAPE IS A MUST!! And allen keys.

[spydervenom]

i carry all the tools i'd ever need and any stock parts i've replaced like bolts and hammers.

and i always have 2 guns. if they both go down and i can't fix them, i dont deserve to keep playing.