MORE Xmag Problems

[CoFFeY[NiTrO]]

Yep. Just got my Xmag back from Havoc. I throw my warp breech on it...it doesn't shoot. It is like I have a retarded warp breech thats not completely round so the bolt hits the breech and LX kicks in. I'm sick of all these Xmag problems . I havent gotten to play with my Xmag in a real game of paintball since I got it(around the end of June). When I take off the breech it shoots fine. I don't know what to do..

[BlackVCG]

What barrels have you tried on it?

[CoFFeY[NiTrO]]

stock barrel. I don't think the bolt is even getting into the breech. I'm pretty sure the bolt is hitting the side of the warp breech and activating the LX.

[abaez]

It runs fine when the breech is removed?

[CoFFeY[NiTrO]]

yes

[SpongeBobSquarePants]

....dremel....

[1stdeadeye]

I know the feeling. I have had two ACE boards replaced. My warp breach has had the anno worn off by the bolt. I am destroying Detents by the score. Manike is going to look at it for me at AO SC day.

BUT, When it works it rocks hard! Only been in the sho twice. It does get frustrating though!

[Recon by Fire]

How about putting some lipstick or something like that on the edges of the bolt, then you could look at your breach and see where it is hitting?

I have had absolutely no problems with mine what so ever I am still on my first balle detent too (Angel detent).

[BlackVCG]

The detents have issues, I've discovered a problem with them that where the ball sticks on the lip of the hole and the ball doesn't come out far enough, so it will double feed.

If I were to work on your gun, I'd hone out the Warp breech and if that doesn't work, I'd get AGD to replace the Warp breech completely.

I wish they would put these things through more testing from the factory.

There's a reason why I won't stop shooting my ULE-Mag...

[CoFFeY[NiTrO]]

Got it. The barrel had to be screwed as tight as possible.

[thecavemankevin]

i had a problem with mine when i had the detent screwed in all the way and LX would kick in.

toss a couple orings on it and see if it will work.

[pbzmag]

I also had the same problem. All I had to do was tighten the field strip screw with my allen wrench.

[cphilip]

Originally posted by CoFFeY[NiTrO]
Got it. The barrel had to be screwed as tight as possible.

That has always been the case with these X mags. Real tight!

[845]

I have had no problems so far. I just dont have a hopper that fits.

[thecavemankevin]

Originally posted by 845
I have had no problems so far. I just dont have a hopper that fits.

halo...very lightly sanded