the Wonder air system?

[FutureMagOwner]

lol i was just thinking about it from reading threads about tank regs unscrewing and various other junk. im thinking of switching airsystems again.

ive used a crossfire first then went maxflow didnt like it then just stuck with a preset pmi.

basically what i want is a tank that can go from my intimidator to my emag QUICK preferablly without any form of a drop foreward.

basically a setup im thinking is having a quick disconnect to the front grip of the timmy and one on the emag and other on the tank that way i can swap out stainless hoses fast without messing around with annoying macroline.

the main 2 things i hated about my max flow was weight and switching from gun to gun. having to switch out springs and spending time removing it from one gun to another was a pain in the butt. there were some other very annoying things but i dont think thats a problem with other tanks that i know of (such as a leaky on off so my tank runs out overnight or pressurizes my gun overnight).

basically im looking for an adjustable that isnt a screw in(like the x-stream) that can be moved quickly from my timmy to my emag (in a style like the datapimp drop just not a drop) and can go from anywhere from like 150-200 psi to 600-800 preferably without swapping springs (although i wouldnt have a problem with that if its fast like it was on my maxflow)

[Thordic]

Nicky West tank QD is hte answer for swapping tanks. www.nwpaintballproducts.com

As for 150-800 PSI output, I don't think any tank will do that reliably. Most tanks will work in the 150-400 range or the 400-800 range well, and outside of that dont work quite the same. Maybe there is a tank out there that works perfectly for every gun, but if htere is, I've never heard of it.

Buy an inline reg for the Timmy, and then you don't need to have a low pressure tank input.

[FutureMagOwner]

sure i could do that but the reg i have on my timmy (the torp) is a pain to grip lol

o well ill look for a nice price for a tank lol

[Remington]

Um, can anyone say AGD Flatline? Hook up some stainless steel hose to the tank with a QD on the end of the hose and a male end on the marker. Then, buy the NW QD block and a Check-It Products Uni-Mount and you'll be all set.

[FutureMagOwner]

meh ok i got my hoses already if i ever do this ill pickup 4 sets of on offs(just to make things easy for me) and some swivel 90* adapters along with a flatline i suppose.

but im wondering minus the hose what precisely will i need to get that flat line on that NW quick connect block set thing and if i buy this http://www.nwpaintballproducts.com/MM011.ASP?pageno=132 (the combo set) does that have the block for both guns? (i only see 1 that attaches to the gun unless im looking at it wrong)

[xen_100]

Originally posted by Remington
Um, can anyone say AGD Flatline? Hook up some stainless steel hose to the tank with a QD on the end of the hose and a male end on the marker. Then, buy the NW QD block and a Check-It Products Uni-Mount and you'll be all set.

dont forget to buy a standard automag springpack so you can use for LP though. anything under about 500PSI and flatline dont fair so well.