Z-Grip Offical AGD Announcement >>>>>

[Shaft]

If that's the way you're going to be about it... ok fine. $115 without the sticky (but a sticky will work) is fine. I can use my I-frame's sticky (or go out and buy a new one).

Can I suggest making them fit E-Mag electronics??? I want an E-Mag and I don't want to put much more into my Warpfed, Superbolt inside, polish warp bodied, I-framed, Retro mag.

A Z-gripped EMag is much better than a Z-gripped Angel anyday.

[krafty]

I'm in!

[MagLover69]

YYYAAAAHHHOOOOOOOO. Thats is was I am probbally everyonbe wanted. I will be one of the first in line to get my gruby little hands on one. But... And this is to Tom, what if we already have the z- grip? Is there anyway those of us who wanted to upgrade could like send it in and qet a discount ? Because I looked hard for the Z and now I got it but... I was just wondering Thanx for bringin it back though!!! By the way this is not complaining just um... curiosity.

[AirChunck]

AGD, you know WE have to give you something to do. Don't want to make your job easy.

[Daniel Morse]

You can count me in!

Without a doubt I am ordering one. I hope the black Z's will be powdercoated and not glossed, just like the old ones. Also maybe you should use polished stainless steel instead of chroming the new Z's so they don't scratch or nick.

[skipdogg]

sorry to be a pain but.....

Can AGD verify if the Z-grips will be made for the standard mags, RT Pro's, or Both???

The power of the Z shall not be denied!

[cphilip]

Re: Z-Grip Offical AGD Announcement >>>>>

Originally posted by AGD
Before we can even think about redesigning the Z-Grip I have to,
Finish the 4500
Rework the mold on the nubbins
Get the Superbolts into smooth production
Design the ACE system
Rework the Extreme bodies for the ACE
Redesign the Warp Feed Module for the Extreme
Gun Dyno the power tube tips with the Superbolt
Get the Extreme into production
Verify the mold fixes in the Warp diverter plate and adaptors
Get the AGD store photos and descriptions done for ALL our parts and products

So until you see all the things on this list done don't ask about Z-Grip production.

So let me see....Hmmmm....Perhaps Fall of 2003?

[headcase]

Re: Z-Grip Offical AGD Announcement >>>>>

Originally posted by AGD

Time Frame:

Before we can even think about redesigning the Z-Grip I have to,
Finish the 4500
Rework the mold on the nubbins
Get the Superbolts into smooth production
Design the ACE system
Rework the Extreme bodies for the ACE
Redesign the Warp Feed Module for the Extreme
Gun Dyno the power tube tips with the Superbolt
Get the Extreme into production
Verify the mold fixes in the Warp diverter plate and adaptors

AGD

That's a lot of stuff to get done before I get my extreme. I'm happy for all you guys that really want a z-grip, really I am. But I want my new marker!!!!!!!!!!

One other thing....what fixes is AGD refering to for the warp. I wasn't aware of any changes to the design.

Later
SSDD

[zvanut]

thats good,
by the time they hit i will have enough to get 1 or 2 :)

[ben_JD]

I don't even like the Z-grip (admittedly, I've never used it) but if AGD is going to go out on this limb, I'll buy one for my soon-to-be backup Automag.

[DjGruv]

Hey AGD

If the zgrip is going to cost $115 because it isn't mass produced and is a special order item, why do the intellaframes cost $115-120. Shouldn't they be around the same price as the other frames?(Dye,Bench,etc.) Just wondering.

[PsychoMag]

aaaaahhhhhhh yyyeeeesssssss!!!!

The Intelli-Z to go with the Intelliframe

[headcase]

Re: Hey AGD

Originally posted by DjGruv
If the zgrip is going to cost $115 because it isn't mass produced and is a special order item, why do the intellaframes cost $115-120. Shouldn't they be around the same price as the other frames?(Dye,Bench,etc.) Just wondering.

Just my spin on things, but the way I understood it AGD said he will do a production run if he gets enough preorders. It's not like whenever someone wants one he'll have one made up.

Later
SSDD

[Chaos]

Tom - Currently i'm using an electro cocker, i wont lie. My mags are sitting in my garage as I tinker with them, but my cocker is my gun i use every weekend currently. I'll be on the pre-order list, and I think that will be the thing to get me to use my mags again (I miss my old zgrip, i had one on my old RT and it was nice, i couldn't afford an adjustable N2 tank then and i needed money....).

Also - what happened to the all-aluminum valves?

If you wanna do something really fun, do a promotion on the zgrip. Make it like $115 without grips, but it will fit Dye Stickies, and have like an option for another $10 the person can add to get a superbolt, or something like that. I really want one of the new superbolts, I'm not sure what the cost is for you, but I think that would be a good promotion to get the superbolts out there, and to get people more interested in buying a zgrip and superbolt.

[Russ]

First, Thanks for listening, Tom.

Second, you guys are killing me!

Make 'em for the E-Mag!
Make 'em out of Stainless!
They cost too much!
Don't make 'em now, I got no money!
Anno!, powdercoat!

Time will tell if the orders actually get placed. I hope so.