LvLx q

[$tevo]

hey, i just installed my lvl x yesterday, and i filled my nitro today to test it out. now its leakin outa the barrel, could it be the orings or maybe the spring i put in with the lvlx? should i try using the smaller spring? lmk thx

[Branchvillian]

Try switching to a smaller carrier.

[Dayspring]

But switch to the smaller carrier using the SAME oring you have in the gun now.

[$tevo]

ok ill try, so i should leave the same spring on to? when i pull the trigger w/ air in it, just just pores outa the barrel

[Branchvillian]

How many shims do you have? Next time that happens try pushing the bolt back wth a squeege.

[$tevo]

how do i get the carrier out, i took the power tube out but i the carrier wont come out

[Branchvillian]

I use a dental pick, I'm not sure you have one though. Be careful with whatever you use to take it out.

[Skoad]

you can use a dental pick or something of the sort....or your field strip screw should fit down in there, just be careful so it doesn't mess up the oring

[$tevo]

i just put another shim in and its alot worse, so i gotta take the shims out and put a smaller carrier in i guess. but i cant get the freakin thing out

[Benfica4ever]

Lvl 10 takes a while to get it just right. i had o go though 2 tanks to get it.

[FreakBaller12]

take your field strip screw and see the hoel down the carrier?
screw your field strip screw down it and pull, vwola

[$tevo]

awesome..it stoped leaking..thx guys, when it stops leakin, does that mean its tuned? i hope

[$tevo]

man...theres gas in it, stoped leaking, and i can feel that the gas is in it cause the triggers tight. but now it does not shoot

[Benfica4ever]

And once you get it to shoot you will probably have to go down another carrier sonner or later becuase the o-ring will be very worn in.

[$tevo]

oh no! its leakin a tiny bit again. should i take 1 more shim out? i have 2 in there right now.