Pump Kits on Sale NOW!!! Go Here>>>

[OldSchoolMag]

From what I understood, you only needed the pump rod which is what's missing from the kits, or at least what I inferred. Now the body, what do you mean by that? I plan on putting the full pump-kit together, and then locating my friends new Automag PF (bought in 2000) and using that body and those internals.

What else do I need after a new 'Mag PF and the pump kit, basically?

------------------
******************************
68 Classic w/Powerfeed
Smart Parts Magic Box Installed on A.I.R.
Green Small Bore All American 12"
KAPP Air Through Grip & Drop Foward
67ci 3000psi Chubby Nitro
9volt VL
AGD user for life
******************************

[Muzikman]

Ok, I'll repeat myself. This is from an earlier post.

For the people interested...
This is my best knowledge of the pump kit. So, If anything I say here is wrong, then please correct me.

There are a few things that your mag needs to have in order for this pump kit to work. When I got my "Original" kit, it came with a new rail. This rail has a groove that is milled in the top from the front to about halfway past the sear. The groove has a slight rise in it near the sear, which is not as deep, and it acts as a ramp. Tom did not mention if this rail comes with the kits. If it does not, then you will need to mill the groove. This groove is where your pump rod will lay.

The other thing that your mag will need to work with the pump kit is an enlarged sear slot in the main body. I do not have the dimensions of this opening, but I will measure it when I get home and post it. Older mag bodies has this larger opening. Since all my mags are 7 or 8 years old, I do not know what the opening looks like on a newer mag, but I do know it is smaller. This opening is so the pump rod has a way to slip into the body and push back the bolt.

Although I have not looked yet, I am sure the pump rod can be made out of the correct gauge piano wire. Since I bought a few of these kits, I plan on making pump rods for them. If I can successfully do this, I will make quite a few and sell them to anyone who might need them. Depending on the cost of the wire and how long it will take to make one, I think that $5 would be a good price.

If you want to look at pictures of a pump kit and some of the internals, take a look at my site. I plan on some time this week finishing this site with picture captions and an explanation of how the pump kit actually works.

http://pittsburgh-music.com/paintball/pumpmag/

Better?




------------------
Jason "Muzikman" Beam

• 68 Automag
  68 Automag (Pumpmag) w/ 6-Pak+
  Automag RT
  Sydarm

http://www.pittsburgh-music.com/paintball

[OldSchoolMag]

Why, yes - thanks for making things simpler for us lazy people!

Also, I'll probably shoot you an e-mail later on with more info, based on what is said here by Tom and those in direct contact with the NEW pump kits.

Also, Tom, would the kits include everything with the exception of the pump rods? Just need to clear a little delima up!

------------------
******************************
68 Classic w/Powerfeed
Smart Parts Magic Box Installed on A.I.R.
Green Small Bore All American 12"
KAPP Air Through Grip & Drop Foward
67ci 3000psi Chubby Nitro
9volt VL
AGD user for life
******************************

[AGD]

They have everything exept the rod and the smaller bumper.

They do have the wave spring.

AGD

[OldSchoolMag]

Ah, thanks. What could we fashion to take the place of the bumper? Also, there'd be no milling required, as in the rail, correct?

------------------
******************************
68 Classic w/Powerfeed
Smart Parts Magic Box Installed on A.I.R.
Green Small Bore All American 12"
KAPP Air Through Grip & Drop Foward
67ci 3000psi Chubby Nitro
9volt VL
AGD user for life
******************************

[Muzikman]

I now have 4 of the pumpkits that they where just selling, none of the 4 have rails. And again, you have to watch to see what size sear opening you have in your body.




------------------
Jason "Muzikman" Beam

• 68 Automag
  68 Automag (Pumpmag) w/ 6-Pak+
  Automag RT
  Sydarm

http://www.pittsburgh-music.com/paintball

[OldSchoolMag]

Well... I'm just really confused now. I'm gonna call my local airsmith on Tuesday and see what he can work out, he's got a great rep with 'Mags. Thanks to all who helped:)

------------------
******************************
68 Classic w/Powerfeed
Smart Parts Magic Box Installed on A.I.R.
Green Small Bore All American 12"
KAPP Air Through Grip & Drop Foward
67ci 3000psi Chubby Nitro
9volt VL
AGD user for life
******************************


[This message has been edited by OldSchoolMag (edited 09-02-2001).]

[azzkikr]

up with this

[azzkikr]

how could I make the bumper that is missing? is it the same thinkness as the one already in the mag behind the bolt. later AZZKIKR

[Muzikman]

You can use the original blue bumper. I have used it by mistake before.

[rjvemt1]

are any of these still available?

[xmetal2001]

Wow, you really brought this back from the dead.

[Rocp15126]

Nope, none avaible from AGD. There was a thread around here about having some made up by a shop. Try a search in the forums, otherwise Good Luck! I got one back when they first came out , I still use it now and then in rec ball pump games.

[HoppysMag]

AHH!! are they sold out? the links tom gave us bring me to the intella Frame and a pic of the pump kit... but no order form!

[Tactical Neural Implant]

AGD stopped making them. I'm not quite sure why? I guess it causes problems with certain peoples mags. The only things I've noticed is it cannot autotrigger, and if the pump is slightly out of position it can cause firing problems. AGD will give you the dimensions and drawings if you ask for them I believe. It consists of a special rail with a groove, a pump arm, pump arm rod, a black spacer/bumper, and this funky spring. Keep searching, someone may sell one occasionally, and then like I said before someone is trying to get a production run made at an outside shop. Good Luck!