emag charger and valve removal ?'s

[SBC Service Rep]

hello,
i recently got an emag with no charger and was wondering where to find one(not the $80 agd one but something a little cheaper). also im having trouble removing the valve, the pin screws out but the valve dosnt come out. help plz

[Grasshopper]

Charger: Search function - You can buy some at Radio Shack; not sure as to the specifics of what kind you need, but I saw a topic about it not long ago that has all the info you need.

As for the valve removal: Put the gun into Manual, take the saftey off, and press the trigger. The valve should come right out.

Edit: Oh, and welcome to AO! :)

[penguinpunk555]

Don't have air in there by the way. Just wanna make sure he doesn't egt a valve threw his head.

[SBC Service Rep]

thanks grasshopper,
i did do a search before posting and the thread you speak of realy gave no decisive answer on which charger would work safely.

[sps16]

I've got an extra charger, i can sell you, pm me with an offer if you want it

[SBC Service Rep]

one more ?, will agd install a ule body and lx as well as tune the lx or will i have to do it

[USAF-Flyboy with a Mag]

you will have to do it...it's not very hard

[Big_Chops]

there are enough threads about it in the tech forum and if u still need help there are people on here than can help you. so it will be easy enough. and welcome to AO

[SBC Service Rep]

theres one problem with installing a ule. one of the screws holding the sightrail is striped. any ideas on how to get it off?

[sps16]

go to your local hardware store and buy some screw magic (i think thats what its called) it will create a new opening on the head of the screw with which you can screw it out

[boggerman]

How mechanically inclined are you? If you are comfortable with a drill press, you can drill through the head of the stripped screw until it pops off and use a small pair of needle nose vise grips to remove the rest of the screw.