PTP micro emag any different from regular emag??

[blakdragon21]

I was just wondering if the PTP micro emag is any different from the regular emag?

[hAppy]

yes its micro-er

its alot smaller than a regular emag

[ChucktheMAGician]

Other than the body, some of the parts are different, on/off pin length and maybe trigger rod length.

Originally posted by BlackVCG
I don't work for PTP, so I'm not sure what their tolerances are suppose to be, but I do know that their Micro-E-Mag on/off pin should be about .670-.675. Trigger rod lengths and stuff like that I just eyeball because MicroMags never seem to work right wih AGD tolerances.

[Kevmaster]

On-Off pin is different length. I would STRONGLY recommend NOT getting one. I've heard nothing but horror stories about them ( I had a horror story myself) and would never touch one again. I strongly recommend AGD emags. Plus, Emags are just as light now with all the ULE stuff...prolly lighter...

[sneakyhacker420]

Originally posted by Kevmaster
On-Off pin is different length. I would STRONGLY recommend NOT getting one. I've heard nothing but horror stories about them ( I had a horror story myself) and would never touch one again. I strongly recommend AGD emags. Plus, Emags are just as light now with all the ULE stuff...prolly lighter...

whats your horror story?

i have a micro-e and it RIPS

the on/off pin is longer and the body is made out of aluminum, and milled in a different pattern, along with the battery pack

i personally prefer mine over AGD E-Mags, but thats just my preference

i have mine hooked up with pimpin 3.0 software rippin out 19-20bps IN GAME!!!! that shot buffering is wild as hell man!

[blakdragon21]

can you still use agds software with it?

[purplemag]

My micro E also rips, no problems as of yet for a couple months at least! I tend to get a lot more oohs and ahhs when people see it. You would not believe the people that will say "So how do you like your new X-mag". I don't think they look anything alike, but I guess some do. I find it to be slightly lighter than an AGD emag, but only a few onces. Plus having the cocker barrel threading is nice! I Love mine to death, and PTP has always answered everyone of my questions in excellent time.

[purplemag]

Yes uses normal AGD software

[Kevmaster]

Originally posted by sneakyhacker420
whats your horror story?

i have a micro-e and it RIPS

the on/off pin is longer and the body is made out of aluminum, and milled in a different pattern, along with the battery pack

i personally prefer mine over AGD E-Mags, but thats just my preference

i have mine hooked up with pimpin 3.0 software rippin out 19-20bps IN GAME!!!! that shot buffering is wild as hell man!

my microE came DOA. Sent it to PTP. They had it for a month or so, I called them, they said the 'fixed' it and sent it back. Less than 1000rnds later, it was DOA again. Called AGD, they took care of it. Problems:
1) wouldn't fire in emode
2) on-off pin not proper length (as they SAND on-off pins that AGD sells to fit the marker. AGD LASER CUTS them for their own markers. Talk about bad tolerences)
3) The tolerances SUCK on the marker
4) mine chopped like crazy until LX.


I sold it for an X-Mag. EASILY worth the $500 more it cost to get the X.

[sneakyhacker420]

my on/off pin is actually a considerable amount longer than the AGD e-mag pins... RobAGD had to custom cut one for Personman when he had it...


e-mode nor firing... was the trigger setup correctly? battery taking a charge?


most mags chopped like crazy until LX... especially if you had only a revvy on a RT/E-Mag


another possibility would be if it didnt have the shim between the body and trigger frame

[hAppy]

Originally posted by sneakyhacker420

most mags chopped like crazy until LX... especially if you had only a revvy on a RT/E-Mag

umm no... agd wouldnt survive this long if their guns only chopped w/o lvl 10

you just shortstroke like no tomorrow

my friend played a whole day w/ his stock mag, no chops w/ a revy

so... maybe its just you

[sneakyhacker420]

i was saying with retromag or e-mag because of their high rate of fire

[Mossman]

Originally posted by xXhAppyAznXx
umm no... agd wouldnt survive this long if their guns only chopped w/o lvl 10

you just shortstroke like no tomorrow

my friend played a whole day w/ his stock mag, no chops w/ a revy

so... maybe its just you

Don't mess with rich 14 year old gun whores with 4000 posts, they know more than you!

[hAppy]

Originally posted by sneakyhacker420
i was saying with retromag or e-mag because of their high rate of fire

o gotcha

i got the perfect solution... halo

my friends got one, too fast i tell ya

[sneakyhacker420]

Originally posted by Mossman


Don't mess with rich 14 year old gun whores with 4000 posts, they know more than you!

rich? rich? nope.

i work at a grocery store making $6 an hour, all but $200 or so has gone to paintball in the past year... in my sig, you may be seeing guns, but what you dont realize is that i put in my own arse-busting human 14-year old labor for each and every one of thoes


ps... was the halo out before mags got a reputation for chopping? no.

LX came out about 2 months after the HALO was introduced


i have a HALO B w/ Z-code software on my micro-e and that thing NEVER skips a beat... soon to be on a warp feed