im moving to the dark side!

[lew]

What compelled you to get a DYE Cocker? Were you dropped on your head?

[WARPED1]

Go for the new Powerlyte Hybrid. It has no frontblock and an internal ram like the original designer planned on before his prototype was stolen...........

[JEDI]

Originally posted by maglover52
well my lvl10 got messed up and the gun would just leak. so i had to retune it so i am just gonna get away from mags and try something new for a while.

Hey, that Dye cocker should be a good choice. Just a tip, QEV (valves) do wonders for the ram on your cocker. For a mechanical, you really only need one on the rear of the ram. The back end will vent quicker, and your gun will cock faster.

(electros have eyes, so quicker in both directions isnt a problem)

Good luck!

[Fixion]

Originally posted by soccer4minimags
Thats funny. You're tired of fixing your lvl 10, so your getting a cocker. Well I guess, look on the bright side if someday you ever have to use co2 you can get away with it on the cocker, where on the mag you couldn't.
Have fun with it, try not to dry fire too much.

Whats wrong with dry firing? BTW I don't have too much more problems with my cocker than with my mag.

Originally posted by JEDI


Hey, that Dye cocker should be a good choice. Just a tip, QEV (valves) do wonders for the ram on your cocker. For a mechanical, you really only need one on the rear of the ram. The back end will vent quicker, and your gun will cock faster.

(electros have eyes, so quicker in both directions isnt a problem)

Good luck!

Sure QEVs help the cocker cycle faster, but you could just increase the cocking pressure (a little) to increase the cocking speed (ram speed) for free. Well... if you don't care about choping or have a force fed loader.

[JEDI]

Originally posted by Fixion


Whats wrong with dry firing? BTW I don't have too much more problems with my cocker than with my mag.



Sure QEVs help the cocker cycle faster, but you could just increase the cocking pressure (a little) to increase the cocking speed (ram speed) for free. Well... if you don't care about choping or have a force fed loader.

Right.

[Steelrat]

Just my $0.02, but the best cockers to get seem to be Works, FreeFlows, or Eclipse. I know that Works and Freeflow give lifetime warranties, though Im not sure about eclipse. All include top-notch parts, and will not reuqire much, if any, aftermarket add-ons. With the Dye you save a little now, but pay a lot in the end. The effectiveness of a cocker is truly due to the sum of its parts, and all parts are not created equal.

[Digits]

NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO,..

:P

Go for the cocker if you really want to..

But giving up an e-mag for one that's not even e-bladed or race'd.

I wish you good luck with your new experience..

May god be with you

[Torbo]

idk, i sold my mag for a cocker.....but now the cocker is being gay. I love it though, so i guess ill give it some more time and Tlc before i trade it for a mag or angel

[Steelrat]

Cockers are not, themselves, inherently unreliable. The problem is that people do not understand their markers, and therefore cannot diagnose the issues that come up.

[JEDI]

Originally posted by Steelrat
Cockers are not, themselves, inherently unreliable. The problem is that people do not understand their markers, and therefore cannot diagnose the issues that come up.

OH MY GOD!!!! Is that the voice of reason?!? Was that an intelligent statement about cockers? Wait a minute.... did hell just freeze over?

[JEDI]

Free Flows are definitely good guns. My back up is a mechanical Free Flow. However, if an electro cocker is in your future, I wouldnt use a Free Flow. I dont trust the wire detent at that rate of fire, or with a forced loader. The detent works well otherwise, on a mechanical, but typical round detents are better for electros.

My $.02

[Ov3rmind]

Originally posted by WARPED1
Go for the new Powerlyte Hybrid. It has no frontblock and an internal ram like the original designer planned on before his prototype was stolen...........

I second that, Powerlyte makes some awesome guns.

[maglover52]

i played a couple games today with my friends ebladed dye ultrlitew and damn its fast, quite, and durable. i was talking to him about it and he says its easy to maintane he has had no major problems or anything. i love it! now i will have a dye matrix lcd and a dye ultralite cocker!

[cockermongol]

sounds cool.

[JEDI]

I wouldn't get a Hybrid. I think they're crap. I've seen their feednecks snap clean off. I've seen a couple where the word "Hybrid" on the back was only half milled in. Real sloppy looking. I don't think those guns are all they're cracked up to be.