Halo B vs Evo2 w/ Zboard

[$tevo]

ok guys, its time for a new hopper for my mech ule mag. right now i have a x-revy. i kinda want a light hopper, but also a strong one that one break. i like how eggs wont pop open and leak your balls like my revy does every once in a while. but i like how halos look. im not 2 worried about what one feeds faster sence i will never be shootin over 20 bps anyway, i dont have an Rt or Xvalve. so plz vote on the poll, and explain why

thx,
steve

[edman282]

halo b's are pretty heavy and eggys are lighter but dont have an as fast feed rate. i would go with the egg

[rikkter]

Originally posted by edman282
halo b's are pretty heavy and eggys are lighter but dont have an as fast feed rate. i would go with the egg

there barely ANY weight difference between the two.

i voted for the egg with z.
bascially because your not worrying about the feed rate. the egg holds more paint, about 20-40 more. whereas the halo holds about 1 pod.
halo has a faster burst rate than egg will ever have due to the spring in the halo giving it the force, but they both have a realiable feed when it comes to long strings.

[Jon/xpm]

$tevo-most people dont have the new z-board for the egg2
i just recently purchased one and it should arrive
soon...
the z-boards are not in stores yet... a few dealers do have them...
so i would only suggest you talk to people who actually have the board so you can get a fair review...

[rikkter]

Originally posted by Jon/xpm
$tevo-most people dont have the new z-board for the egg2
i just recently purchased one and it should arrive
soon...
the z-boards are not in stores yet... a few dealers do have them...
so i would only suggest you talk to people who actually have the board so you can get a fair review...

i have the zboard.
the only plus i see over the yboard was that it continues to spin AFTER the eye gets activated. this making it a more reliable feeding than the yboard.
i'm not sure if they sped the motor up or not, but they might of. but this is the real only plus from it.
it doesn't 'adjust to your fire rate' like they claim.

when you turn it on, it'll spin fast, then it'll spin slow. then if you break the eye, it'll spin fast, and when eye gets reactivated, it'll spin a little, then go back to slow. then finally stop if a ball is in the eye long enough.
its hard to describe. basically all it does is spin after eye gets activated at a slower speed.

[RRfireblade]

That's a tough one only 'cause you don't have an Egg already.If you buy an Egg and then a Z board,only way to do it right now and yes they ARE available retail,your gonna spend around the cost of a Halo.The Z-Board is WAY faster than the previous boards according to my personal BPS tests done w/ a timing chrono,but it is still not as fast as a Halo.For that kind of money I would probably get the Halo.If it doesn't break,be honest people MANY Halos break,it'll suit you indefinitely.

Jay.

[sps16]

i've tried owned both the egg and halo, i really didnt like the egg. It sat up way too high and i got soo many hopper hits on me. If your deciding on a hopper strickly by feedrate i think you should go by ergonomics b/c both feed more then fast enough for your mag. I vote halo

[rehme]

yes i voted for the halo

even if they both feed around the same i just cant get over the way the egg looks. if it looks some what like the 12v or halo then i might have voted for the egg.

[coolcatpete]

who has tried the evo2 with z. anyone here.
Pete

[Spartan X]

I HAVE a z-boarded egg. I'm not sure why I got it because my Y-board was able to keep up wit my 18 bps strings on the viking. I think I got it just in case I get faster. But foir your mech mag, a normal Y-boarded egg will do just great. I do under stand that the halo is better but I Have grown attached to my egg since I have had it for a while now. (3 guns)

I like the way the egg sits, it puts the weight on the trigger frame and back of the gun, since the tank is cradled into the arm, it feels fine. Plus that extra paint is good. Did you know I crammed 220 balls into my egg? I counted all of them.(includes the feed neck and the ball in the gun :) )

I have seen alot of people break paint inside their Halos, I have never broken a ball in mine and I never will, those flex fingers are great. Plus the Halo is harder to take apart and put back together.

I like the Lid, I pull it down to were it stays, dump the paint, then use the empty pod to hit the lid shut.

Plus halos have troubles with ball denents they could puch past then, not so with the Egg.

Since your not shooting over 20 bps get the y-boarded egg.

[demonguy8]

How about if your NOT shooting above 12 bps get an egg.

Zboard or not, your still not changing the fact that the egg is a GRAVITY FED hopper! Once it starts feeding, it gets faster and forces paint down the feedtube. From what

Ive gathered on this thread, the Zboard is so radical, cuz it spins the impeller for a tiny bit longer than a normal egg board would .Sooner or later the egg will stop trying to spin and youll be back to good ol gravity on your first shot again. Now if your a back player or just trigger happy you can keep the EGG spinning for the entire duration of the game, but then you can have the privelage of replaceing batteries CONSTANTLY.

Its up to you in the end but IMHO the egg just doesnt compare to the power that is halo.

[rikkter]

well, i have a video of a yboard egg skipping shots at 15bps. and since it was NOT a hopper test, it was a GUN test, i'd assume its safe to say they had the speed adjuster all the way up.

however, i played today, tried the halo out for first game, but kept out shooting it because batteries were dying, so i threw on my zboard egg.
it fed fine, and very reliably, just like the halo would.

if you're not worrying about speed, then once again, i'll say get the egg.
why?
well, halo definitally beats the egg in speed. mainly because it has the burst rate that the egg will not have unless they add a spring into the paddles and make them stiffer. zboard egg is fast too tho. just not force

egg has the battery life against the halo
egg also has the ball capacity against the halo
halo has the shell structure over the egg

but its up to you. i'd get the egg despite the problems with shells breaking easily.
egg sits really different than the halo so, up to you once again.



the pictures game out really crappy, but the guns are in the exact spot in the pictures, i put them in a program and lined them up. so, but yeah

[xmetal2001]

I say Halo, because i cant stand the way the egg sits. Plus the halo looks better. And there is the added plus of not buying something BE.

[Spartan X]

I used my Eggs on my X-mag and it did not look that bad....I guess because I do not have that sight rail... But on my viking it looks great.

[FallNAngel]

Everyone keeps saying how nice it is that the Evo2 holds more paint than the Halo... I really don't see how that matters. When you run low on paint and put a new pod in, you're still only putting in the 140-150 that the pod holds. Unless you want to completely fill your pod up when you're no where near empty, I don't see what difference it makes.