How shots is alot on an emag counter?

[blakdragon21]

how many shots is considered alot on an emag? 40,000???

[Koosh]

40k is nothing... thats like what, 20 cases of paint? I could do that in a weekend

I really don't think its possible for there to be "alot" of shots on an emag... as far as the valve goes, as long as the Orings are happy, it'll run forever... I'm a little hazy as to how well the electronics hold up though... but for damned sure they will last longer then 40k shots!

[boggerman]

I had 65K+ on mine before I lost the solonoid. When I soldered a new one to the board, the shot counter reset, so I am at 3 or 4K now.

[tony emerson]

you cant really trust the shot counter it is not an odometer like on a car. They are easy to reset i have done it to mine a few times if the batt runs down too far the counter will reset.

[athomas]

The shot counter on mine resets all the time as well. I do know that I have shot around 40,000 balls through it plus probably another 15000 or more trigger actuations and/or dry fires. I bought mine used. I'm willing to bet that if mine actually had a shot counter that wounldn't reset, it would show over 100,000 shots. It still works like a top with no signs of wear.

[painball]

My angel lcd has 100k+ shots on it.

[cphilip]

Most people put 40K on em just dry firing em and letting thier friends dry fire em. Its nothing.

[pito189]

I don't think it really matters.

You can't trust the shot counter anyways. Mine was reset this weekend after an unsuccessful attempt at getting 3.2. At the end of the day Saturday after shooting a case and a bag. The counter said 5669...

So you really can't put much stock in the counter.

[TheTramp]

Also take into account that pulling the trigger with the electronics on but no gas in the system also "counts." This produces no wear but does go on the shot counter.

[RRfireblade]

Originally posted by cphilip
Most people put 40K on em just dry firing em and letting thier friends dry fire em. Its nothing.

I did 55k on the Xmag before I had it on the field(many w/ no air)the first time, then I got 3.0 flashed on it and had another 10k on it in 2 days before I when back and got 3.2. Now it has 3k on it since I left it on over night by accident and killed the battery.

Jay.

[RRfireblade]

Originally posted by TheTramp
Also take into account that pulling the trigger with the electronics on but no gas in the system also "counts." This produces no wear but does go on the shot counter.

Not anynore,3.2 has a trigger test mode.

[TheTramp]

Originally posted by RRfireblade



Not anynore,3.2 has a trigger test mode.

I stand corrected.

I guess I'll just have to get the 3.2!

[RRfireblade]

Originally posted by TheTramp



I stand corrected.

I guess I'll just have to get the 3.2!

TRUST ME!!

If it wasn't for that I'd need more digits on my display!!

I'm starting to wear off the anno on my trigger

Jay.

(stuck at home on disability if you don't know)

[hitech]

Can someone tell me how "Test mode" works? How do you set it? Thanks guys.

[RRfireblade]

Originally posted by hitech
Can someone tell me how "Test mode" works? How do you set it? Thanks guys.

Just turn it on and toggle the menu to Trigger(TRG).

The display reads "off" when at rest and "on" when the HES senses the trigger pull.No added shots and no cycling of the gun.

Jay.