Warp feed?

[soccer4minimags]

Sorry for this dumb question. I was just fixing to pick up one of those warps on specail at the agd online store and read the description taht it only feeds at 12bps.
Whats up with that, is that why there cheap? Are these different or something than other warps? I thought they were one of the fastest loaders available. If these are like the description say, then I guess no thanks I'll stick with my revies and egg II.

[rikkter]

thats with only 9 volts. you can hook up two batterys to them and make them go over 20+
they're worth every penny even without the 12volt mod to make it faster.

[Big_Chops]

you could always intellifeed it. so when you pull the trigger the warp spins. i have never out shotten a warp even on my friends angel and i could rip 16 bps with teh warp and there was no mod

[PaintSkater00]

Where would you buy the 12volt mod from?

[soccer4minimags]

So what your saying is you have to buy a mod out of the box for it to feed over 12. Or is it ready to just plug in two 9v?
Does agd sell this mod? Whats required for installation?

[WARPED1]

Havoc_online from here on AO and a trusty AGD tech, does that mod, among others. In the tech section, theres a thread "All about the warp feed", go read it.

[Wc Keep]

you do not need a 12vlt mod. its something nice to have but i garantee you that you cannot outshoot it. the 9volt works damn good.

[rikkter]

Originally posted by Wc Keep
you do not need a 12vlt mod. its something nice to have but i garantee you that you cannot outshoot it. the 9volt works damn good.

what do i win now? without 12v mod i use to outshoot it in bursts, but not strings.

[PaintSkater00]

Sorry to hijack the thread, but I have a center feed ULE body, is there anything I can do to make the warpfeed work on a center feed body?

[WARPED1]

Yeah, just use a 90* adaptor that I believe comes with new warps.(I bought mine used, so I have 2.)

[Wc Keep]

Originally posted by rikkter


what do i win now? without 12v mod i use to outshoot it in bursts, but not strings.

maybe you should work out a kink in your hose. theres probably a really small one you cant tell about that is causing your warp to not empty enough to let the revvy spin when you shoot bursts. ive done that before.

[rikkter]

i checked everything lol, it was working, and everything else was good and perfect.
tell you the truth i was out shooting it when i put the 12v mod on it too. but i realized it was the revy not keeping up with the warp. as soon as i slapped on a faster loader (halo at the time), not a single missed shot

[hhomes]

can u hook warp to a classic body? i dont know to much about warp if ur right handed what side would be more comfortable ?

[rikkter]

if your right handed, warp goes on left side of the gun. and yes, it'll go on any of the powerfeed bodies depending on which powerfeed plug you can use.

if you have a left powerfeed, you'd need to either wrap hose around front and connect it to the lower end of the powerfeed, or go up high to the top.
if you use top of the powerfeed, dont need to change powrefeed plug, if you use the lower end, you'll need a long powerfeed plug which comes with the warp.

[hhomes]

i have standard feed, i guess that wont work?