Hypermags??

[striker]

Wow. Lots of info, thanks. So basically, I shoulden't have to worry about the on/off pin length because of my ULT, and the X-valve should stop any "bolt stick" probs, right?

Also, how can I tell the bolt is chipping just by firing a few shots? Will it be obvious? Like a *kakk* *kakk* sound?

And finally, I really also don't need to worry about the selenoid dwell settings because the on/off pin is the correct lenghth

[phantomhitman]

hitech is def the man to speak to on hyperframes. thanks for your help and info with me also. i will let everyone know when I get my hyperframe sent in to them if the prices are different.

[hitech]

Originally posted by striker
Also, how can I tell the bolt is chipping just by firing a few shots? Will it be obvious? Like a *kakk* *kakk* sound?

And finally, I really also don't need to worry about the selenoid dwell settings because the on/off pin is the correct lenghth

I fire a few shots (with air) and then dissamble the marker and look for wear on the bolt and sear. The best way to insure the sear is engaging correctly is described in my FAQ.

I am still of the opinion that low dwell settings are a bad idea. I would not use a dwell setting(s) of under 20ms on a 'mag. With the ULT you MIGHT be able to get away with an ininitial short setting (say 6 or so) and a "return" dwell to make up the difference. The freq. could also be set low. All of this is just to conserve battery life. Personally, I think it is better to get the plainview 9.6 volt nimh battery and just charge it before every day of play. Then you can use higher settings and play worry free. That's what my brother does with my old hyperframe.

[Meph]

$120? Bloody hell, they better not have increased it to that. I called them less than 2 weeks ago to find out our cost on the thing and what their msrp was as well.

I'm going to have to call them again.

[phantomhitman]

meph, please keep me updated on the price that they quote you. i will be sending my hyperframe off to them as soon as it arrives to me. thanks

[striker]

Ok, thanks Hitech! First things first though, I need to get a hyperframe!

[GhillieGuy]

Like Hitech said, the best thing on the new board is the solenoid setting(instead of one it now has three).

[striker]

Ok, one more thing. I'm wondering how many shims you are using with your Hyperframe & ULT. And also what the dwell settings are (in case I decide to pick up the 20bps board). Also, you mentioned that the 20 bps board allows full auto, but I was under the impression that the 13bps board also has that option.

Basically, all I will need is a regular 13bps Hyperframe, slap it on there according to the instructions, and set up the correct amount of shims and I will be set. yes?

[Meph]

I have 2 shims on with my ULT and hyperframe.