electro cocker guys need got a question

[Nick O time]

I got a shorty body and want to get either the ANS frame or the Race frame(same thing different eyes). but anyways the shorty body came premilled for eyes. i need to know what eyes its milled for. if you look closely at the picture, the milling for the eyes are right next to the ball detent slot.
hope the pics work:

Edit: guess it didn't work(the pics were hosted from some other place fyi) so here is an ebay link to where i got it from:
http://cgi.ebay.com/ws/eBayISAPI.dll...ayphotohosting

hope the ebay link works

[Nick O time]

upums

yar

[boggerman]

Are you asking if this is for ANS vs. Raceframe or ANS vs. EBlade? If you are asking about EBlade, then no this is not where the EBlade eye goes. From what I have seen of them, this appears to be the ANS eye location. Hope this helps a little.

[louie]

Looks like a real halfblock body and those are made by RaceGun.

[FragTek]

It's FAR from a real RG halfblock body... compare the two and you will see the major milling differences.

As far as I know the RaceGun eye goes on the RIGHT side of the gun, so I would guess that its pre-drilled for the ANS eye.

[headcase]

Originally posted by FragTek
It's FAR from a real RG halfblock body... compare the two and you will see the major milling differences.

As far as I know the RaceGun eye goes on the RIGHT side of the gun, so I would guess that its pre-drilled for the ANS eye.

That sure looks like the milling that Racegun was showing off on the original Halfblocks a while back.

As far as the eyes go, the Race set up is a beam break set, so the holes will be on both sides. From what I hear about the ANS it is the same electronics as the Race, except installed in a different frame.

So I would say get the Race eyes, or call ANS and get them from them.

[Nick O time]

thanks

just asking about what the body is milled for, not what frame to get. I am gonna get an ANS frame if any of you care because i like the ANS eyes more. The ANS eyes are more like timmy eyes which imo are better than a single eye. Anyways thanks for the info everyone.

[maglover52]

yeah thats not an eblade milling so its either race or ans. look in the pic at the top it has a trigger frame (i cant tell the diffrence between ans and race) thats probally what its milled for. nice lookin body though!

[Nick O time]

thanks

yeah in the picture it shows the gun with a raceframe but no eye connections. so i am not sure i think its an ans though, because ans has the dual eye system where as the race frame only has one eye(i am pretty sure) but i just want to be certain.

[UltimatePaintballer]

HA! its got a shocktech front block screw on it. lol just noticed it and for some reason i needed to point it out. otherwise he knows its not for an eblade frame so stop pointing it out

[Ice-Child]

FIRST LET ME START WITH, That is NOT a Racegun Halfblock

It is the proto type body. They were made by MacDev for Racegun. It is milled for the Race eye. You may find a few parts hard to find or hard to install. But once you get it together, you will like it. If you have any problems, call Tom at Racegun USA. He can help you out a little. But right now they are all at Pan/Am in Vegas. So wait till this coming monday to call.

You won that from the guy in Hawaii. He bought 15 of them in all from MacDev. Its a long story, but they are not cut to Racegun Specs. So they wont use the same parts as a Racegun Halfblock. So you will more then likely need to call Tom. His number is 714-528-RACE(7223). They are in Placentia, Ca.. If that helps you at all.

Hope that Helps,
Rob

[Ice-Child]

Originally posted by FragTek
It's FAR from a real RG halfblock body... compare the two and you will see the major milling differences.

As far as I know the RaceGun eye goes on the RIGHT side of the gun, so I would guess that its pre-drilled for the ANS eye.

Just a little peak at the real deal Racegun Halfblock

Team Mates


We have two more on the way. A Solid Black one (my backup), and a solid Blue one.

Later
Rob

[UltimatePaintballer]

Originally posted by Ice-Child
[B]
Hope that Helps,

hope it helps?!?!?!? dude you just saved him alot of stress and his dad 550 bucks! great work

[Ice-Child]

Originally posted by headcase
That sure looks like the milling that Racegun was showing off on the original Halfblocks a while back.

It is, to a point. MacDev did the first proto type bodies for them. So it is the design they were showing off. But it wasnt the final public design. The one released to the public is just like the two I posted above. It actually isnt a bad body design. But I like the new design better. Easier to keep clean, better looking overall.

Rob

[Nick O time]

yes i agree

i do like the new ones more, but i didn't want to get on a waiting list. well thanks man u r a life saver.

Edit: what exactly is different besides looks like any flaws or anything? thanks

lol just a thought but does that mean mine is more rare than the others since it is a proto body?