Flatline Barrel

[speedyejl]

Ugh it seems a bit of a stretch, I mean why would they be a different speeds? Any so what if they bump... ugh

[Meph]

Originally posted by FragTek
You need a cocker to 98 thread changer screwed in first....

Frag, you mind giving a link to where this adapter exists? What aftermarket company sells cocker to 98 threads?

[Dbl_Edge]

FYI the flatline cocker doesn'T accept any other barrels, and no other autococker accepts the flatline. That means no flatlines barrels are produced with autococker thread.

Jake

[FragTek]

There isn't one. It would have to be hand made by someone like White Wolf... I stated that earlier in the thread.

[TheTomBomb]

Someone said that the cocker flatline doesn't have threads, it clamps on. So, an adapter wouldn't work any way.

[FragTek]

There would be TWO adapters required for installing a flatline on a mag.

The first adapter being a cocker/98 adapter, and then the stock flatline adapter that comes with the Flatline (which is a clamping system) would screw into the cocker/98 adapter... Then you would clamp in your Flatline to the Flatline adapter.

Kinda confusing

[Meph]

Ah, so it's hand-built. Which will cost more than usual.

Frag, you're thinking way too much. KISS.

Just make a cocker-threaded adapter! Cut out the 98-threads and 98-flatline adapter piece all together. Just make it so you thread in the cocker threaded adapter and clamp the flatline into IT.

If it must be custom made might as well make it worth it and a better design.

[doc_Zox]

http://thecog.bizland.com/reviews/flatline.html

[FragTek]

Originally posted by Meph
If it must be custom made might as well make it worth it and a better design.

Agreed!

I think we should do this, though it may not work due to barrel break issues (which there may be a way to work out...) I am sure that there are people out there that would buy a Flatline mag, there has to be. Wouldn't u tend to think?

Go full scale with it, custom mag shroud and barrel adapter. All-out style. Maybe I will talk to Rogue about this

[Woodsball Willy]

cool!

Flatlined Mag = Awesome Idea
Custom autococker threaded clamp adaptor for m98 flatline barrel = Even better
The idea of milling your Mag body to fit a flatline properly = worth it

Does anyone have a line on someone who could mill one of these pieces? I'm officially on the hunt for a flatline barrel and a milling maniac.. I am also going to try it with a autococker to 98 with a flatline on the end and see if paint breaks!


Peace love and happiness people! haha

[TheTramp]

[DvS21]

apex ftw use the adapter to put the apex on a better barrel though, and Holy Necropost batman!

[maniacmechanic]

apex ftw use the adapter to put the apex on a better barrel though, and Holy Necropost batman!

I know a couple guys that have APEX tips on DW Firburs they shoot straight & far & paint breaks if its good paint

[craltal]

Holy Necropost batman!

yeah, a 4 year old thread being revived. I think this just might be close to a record...

[ProblemKinder]

just my opinion, but i think flatlines suck :o

agreed. i bought a A-5 a long time ago that came with the flatline. i made about 80 bucks selling that flatline