Electro Logic Vert Automag Frame????????

[No Excuse]

Originally posted by speedyejl
They can handle 1.5amps thats WAY more than enough

1.5amps at what voltage? (i did say power not current )

I only ask because I have heard some hyperframes require a higher voltage battery to function correctly.

[speedyejl]

http://www.wickedairsportz.com/products/eqtim.htm

Most equalizer information on that, you probably could talk to WAS about getting a board or sample or just detailed specs. I just ordered one of your mech frames but if this comes out front I'm so buying one asap.

Anyhow the Timmy boards fit in Angel Space frames so their probably going to fit into your Vert frames. The only focus would be getting the solenoid mounted, along with an led and a slide switch in the rear of the grip frame. Not to forget the microswtich needs to be mounted.

The Morlock board would work, but it lacks debounce and is pretty hard to program through the trigger, costs $120 from Doc, same price as WAS. It also would be sort of cheap feeling since it would require some extra knowledge to use the marker. The WAS board would work flawlessly.


On the note of power, it will handle any voltage you through at it with reason, I've heard up to 36v. Anyhow 9vs work fine, with the ULT this isn't a problem anymore.

[TheTramp]

What about the new drop-in IS boards they're making for Spyders? They have the E-Frame type switch (same as the Centerflag) which is problably easier to mount and they have all the goodies you've been talking about including the adjustable dwell so you could set them to work for Mags.

Plus...they only cost $70.

[No Excuse]

Originally posted by speedyejl
http://www.wickedairsportz.com/products/eqtim.htm

On the note of power, it will handle any voltage you through at it with reason, I've heard up to 36v. Anyhow 9vs work fine, with the ULT this isn't a problem anymore.

Unfortunately I dont have enough Orings for an ULT.

[Iron Mag13]

Ok im a n33b when it comes to elctro.....i WANT to buy one of these suckers so i got some qustions. 1st you siad later back that u could use a ULT with it....but u also siad that it would have magnets. now if im correct the ULT pushes back your trigger but does the magnet do theat 2????? and were would the space be to put the ULT(now i dont know in regualer elctro's if its in the frame or the main part of the gun. THANKS!

[speedyejl]

The ULT is an on/off pin, this frame has an electronic trigger, there is no user interface to the mechanical return of the ULT. The trigger which activates the solenoid which in turn pulls the sear which activates the on/off (which could be a ULT pin), would be returned by a magnet.

edit: no excuse, most hyperframe users are succesfully using normal 9v batteries without ULTs

[CoolHand]

Originally posted by Iron Mag13
Ok im a n33b when it comes to elctro.....i WANT to buy one of these suckers so i got some qustions. 1st you siad later back that u could use a ULT with it....but u also siad that it would have magnets. now if im correct the ULT pushes back your trigger but does the magnet do theat 2????? and were would the space be to put the ULT(now i dont know in regualer elctro's if its in the frame or the main part of the gun. THANKS!

The ULT is a modification that you install in your valve, and it does not affect the frame in any way.

Normally the trigger rod pushes the trigger back into place, but when you use the Hyperframe sear, there is no trigger rod, so they just use a really heavy microswitch to push the trigger back out. My goal is to find a switch so light that it could never do that, which is where the magnet comes in.

Thank you for your interest.

[No Excuse]

Coolhand,
I hope you are going to do a light trigger made from CF, lexan or delrin to complement the light microswitch.

[Adrenaline_Junkie]

Im sure this has been asked a million times but about how much will this frame cost if it takes hyperfrmae parts. I was also wondering if you do start making the frame for hyperframe internals if we could send our old hyperframe in and you could swap the internals into the Logic. The only reason i ask that is cus i have no idea how to take everything out of my hyperframe and put it back in.

[sslecyk03]

I first off think this a great idea to begin with, but like someone said before me, if u could find a way to fit a was board in there than it would be awesome. Do u plan on looking into putting a higher end board into the frame or are you sticking with all CF parts. Also if u did use a different board, how would the price be affected?

[Adrenaline_Junkie]

If you can get an electro frame for the mag with a WAS baord that would rock. I would sell my hyperframe in seconds. I like the idea of a magnetic trigger to.

[CoolHand]

Price is still up in the air.

I haven't talked to WAS yet, but I am going to.

I will make the call on what board we use when I have talked to both WAS and CF.

I can swap out the innards if you don' know how.

I think (still up for debate, but reasonably sure) we will be selling these fully assembled, in kit form, and as bare frames.

[sslecyk03]

ok the full kit thing is great, now i dont have to worry about screwing up the assembly. Maybe u can make it an option for what kind of board we would like. The WAS boarded frame would be more expensive and if people want the CF frame then they can get it with a CF board. But yea, if you could put a WAS board in it i would buy that definately.

[Adrenaline_Junkie]

Well if ya do make them for CF internals plan on me buyin one. If ya make a new trigger frame with WAS i'll sell my hyperframe in no time to buy one. I think the idea about the WAS and magnetic trigger would make an awesome mag frame.

[speedyejl]

AWSOME?

Then if there was an air smith who would drill out ULE Bodies for EYEs and rails for the wires people could have ACE'd Mags!!

That would be sooo much bigger than HK'd Speeds!

Imagine this mag

Xvalve
Dallara Body
E-Logic Frame with/ WAS and ACE'd
and some really kick *** anno

It would rock the market beyond anyones belief, and still be cheaper than a ACE'd Speed, DM4 or other big stuff at the moment.