AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
On Ebay a gentelman by the name of Scu_ter is selling them. I have bought 2 conquests from him. A stand up guy. Tell him Jess from Alaska sent you to him.
The max working pressure of a conquest I believe is around 650 to 700. It will work on an automag but there may be a posibility of damageing your conquest spring. Automags usually need a higher output pressure (800 to 850). That high pressure is needed to set the valve of an automag. Then the Automag valve regulates the air from there to 400 or so. My buddy tried a conquest on his Minimag and it worked fine. But he removed it when he heard about the possible problems. I used mine on Autococker and now my Matrix.
I don't understand how it can hurt the system at 700 or so, if mac dev knew it could hurt it, why would they bother letting it go so high, I'm just a bit nervous because I was planning on getting a mag and was planning on switching tanks around from my imp to the mag
Originally posted by tony3 if mac dev knew it could hurt it, why would they bother letting it go so high,
I'm just a bit nervous because I was planning on getting a mag and was planning on switching tanks around from my imp to the mag
Check thier site, lasttime I was on they stated that the "RT" could not use the conquest/max attack. However I ran my Emag this weekend at 6-620psi just fine. I have heard of guys using a conquest on mags however on some ocasions the main snapped....
IF you really want a tank to both and do them well get the hp max flow. Yea SP sux but there tanks are top notch
Comment