Micro E-mag to Reg E-mag???
I have a micro emag. Say I wanted to use a Deadlywind chord body now. What exactly would I need to change out? I am guessing the body, a new body rail, and a new on/off pin? Someone please let me know! Is it possible?
-
-
Mod... put in wrong forum, can you move to Automag tech for me? Thanks! -
you need an e-mag rail + body, but the on/off pin stays the same... you don't need to change the valve in any wayRooster "But such is the mentallity of the Arab people. Which is why as long as there are Arabs, there will be a terrorist problem."
^^^ known AO racists
Contact Info
AIM: holsamoht
e-mail: [email protected]
My FeedbackComment
-
Agreed... except the on/off pin MIGHT be a tad bit different, not sure though. I know that the pin needs to be pretty exact.Originally posted by NJPaint
you need an e-mag rail + body, but the on/off pin stays the same... you don't need to change the valve in any way
FragTek Customs - Cyborg Owners Group
AO Feedback - PBN Feedback
"AGD is good because 2/3 of their name is AGG :)" - DiRtY HiPpYComment
-
all the valves are the same... asuming you are using the same frame... why should it matter?Rooster "But such is the mentallity of the Arab people. Which is why as long as there are Arabs, there will be a terrorist problem."
^^^ known AO racists
Contact Info
AIM: holsamoht
e-mail: [email protected]
My FeedbackComment
-
Actually a lot of it has to do with the rail being a different height than where the micro-e's body places the valve.
FragTek Customs - Cyborg Owners Group
AO Feedback - PBN Feedback
"AGD is good because 2/3 of their name is AGG :)" - DiRtY HiPpYComment
-
ON-OFF PIN DOES NEED TO BE REPLACED
the rail and body would be needed in addition to that.
otherwise, you should be set
Comment
-
e-mag body
e-mag rail
long front frame screw
e-mag on/off pin
and get rid of the shim between the micro body and the trigger frameProud Member Of The AO Cesspool Since 08-24-2002Comment
-
Very cool, thanks guys!Comment
-
Sneaky
E-Mag On/Off pin... muahaha...
FragTek Customs - Cyborg Owners Group
AO Feedback - PBN Feedback
"AGD is good because 2/3 of their name is AGG :)" - DiRtY HiPpYComment
-
What are yo going to do with the Micro body?I think there for, I am I think. am I?Comment
-
hang on to it for grins? I really have no idea, have to get some money and figure out what other body I want first!Comment
-
get the ULE or chord body if anythingProud Member Of The AO Cesspool Since 08-24-2002Comment
-
yeah those Chord bodies are something else especially annoed right. But 250 big ones kinda steep so have to wait for a few paychecks and till after christmas!Comment
Comment