Warp body and warp or X valve

[billbob777us]

I just wanted to see what you guys think, Should i get a warp body and a warpfeed or a x-valve? (the warp body is the ule warp)

[SuiciDal Sn Y p ER]

x-valve

[deathstalker]

Originally posted by SuiciDal Sn Y p ER
x-valve

[SatansGun]

what valve you got right now? if classic then get a x valve but if you have a retro then get the warp body and warp

[golfy1486]

X

definitely the x

[frost]

x go for proformance over looks first!!

[tony3]

if you got lvl 10, then go for the body and warp, if not get the xvalve, xvalve is nice but i can still shoot fast enough with a classic

[chris99506]

i just bought my warp and you know how AGD advertised the warp loading 20+ bps? well it doesnt.. it actually feeds about 10 bps, it says so in the manual and i compared it to my richche 2k. unless you want to solder a voltage reducer(because if you put more than 12 volts it will blow up the board) and another 9volt plug into the board. the warp doesn't feed upside down as advertised unless you count the balls already in the hose. and you need about 25 paintballs in the system to shoot. now if those "minor" details were made perfectly clear then i wouldn't be so pissed but AGD advertised about 25 bps but they "forgott" to mention the mods needed for the warp to do as advetised.

[Bad_Dog]

Warpfeed and ule warp body

beacuse thats what I wish I had right now!

[decimator4]

From AGD Store: "Feeds balls uphill at 12 BPS with a 9 volt battery!"

[rjvemt1]

warp and warp body! here is why, i have a classic with a warp, warp body and hyperframe. i dont 'spray-and-pray' i use carefully placed snap shots and have yet too outshoot the valve or the warp(13+bps). the biggest advantage i get from the warp is the fact that i have not had a single hopper hit since i bought it. instead of looking around a bunkle and limiting my field of fire, i look over the top of bunkers, a full 180 degrees instead of 90 degrees. with only the top of my head and my barrel exposed, i get an extra 4-6 seconds to fire without that big a## target sittin 5 inches above my head! the other advantage of this is that opponents expect to see my hopper and when they dont they dont think i can shoot, with my barrel linned up in front of my nose and no hopper visable i can often shoot way before they think i can.

i play front, very close, close enough to hit barrels, hoppers, feet or packs left hanging just out of bunkers, not only do i minimize the shot picture i give opponents without that hopper coming out first but, like i said before, the first things out of my bunker are my eyes and my barrel.

[bryceeden]

Originally posted by chris99506
i just bought my warp and you know how AGD advertised the warp loading 20+ bps? well it doesnt.. it actually feeds about 10 bps, it says so in the manual and i compared it to my richche 2k. unless you want to solder a voltage reducer(because if you put more than 12 volts it will blow up the board) and another 9volt plug into the board. the warp doesn't feed upside down as advertised unless you count the balls already in the hose. and you need about 25 paintballs in the system to shoot. now if those "minor" details were made perfectly clear then i wouldn't be so pissed but AGD advertised about 25 bps but they "forgott" to mention the mods needed for the warp to do as advetised.

My 9v warp feeds upside down, and does about 16bps.

[frost]

also with the warp make sure ur battery is frest i find that frest and namebrand batteries work the best!

[JonDaAzn]

also, remember that your warp can only feed as fast as the loader on top of it

[billbob777us]

i got the x - valve its great thanks for advice