anybody have any extras?
apparently they are another flatline part that is indefinitely out of stock.
apparently they are another flatline part that is indefinitely out of stock.
-
You are the Wormtongue of AO.~bofh
-
Use another brand. The AGD gages are the unfortunate victims of keeping the cost down. Just be sure you get the LP output, and HP tank level in their correct places.
-
I was going to grab some other brands, but the AGD ones are actually smaller than even the micros. I had micro gauges on there before, but they didn't leave much room between themselves.You are the Wormtongue of AO.~bofh
Comment
-
AGD guages fail way more than even the crappiest microguages, I've had the writing on the inside flake off and on a used flatline I bought there was moisture in them that never dried out.
I'd buy some micro's, as long as they fit you're in business. Boston Paintball sells PMI guages for 12 bucks each and they work far better than the flatline ones, and they should fit.Comment
-
i put kapp gauges on all my flatlines...they fit and work fine."whoever did that in the bathroom needs to start eating right and go see a doctor" - Tunaman, AOSC 2
"back in the day of pumps this would have taken all @!#$ing afternoon" - Albinonewt , "Treatise On Welts"; chapter 2: The Electro RevolutionComment
-
the gauges on the flatline are the worst gauges i have ever came across.
mine failed on the second fill.
replaced them with micro guages."The Few Who Do Are The Envy Of The Many Who Only Stand And Watch"
Alway Remember *343*
Si vis pacem, para bellumComment
-
macdev micro gauges fit and work very well. Worth the extra cost
AGD Pride Emag With 4.0 For Sale Here
03 Vision Shocker #00014 BLUE
"Personally all I want is a stripper and a corn dog" by RevBrownComment
-
I have to admit, my gauges are flaking a bit as well and have some moisture that is always present. But they still work fine. When they stop, I will probably replace them with something else.
www.ShartleyCustoms.com
Custom Paintball Products and Accessories
CLICK HERE to Check out our PDU SERIES GEAR!
its more like a paper cut that has primadonna's yelling murder... - GlickmanComment
-
Pretty much anything else on the market BESIDES the FL gauges will work fine. I have a small box full of bad FL gauges. Keep in mind, micro-gauges are just an indicator. They aren't a gauge for accuracy. If you really want to know your pressures, get full-size ashcroft gauges. Air America sells ashcroft gauges with their name on them and they are a bit smaller than the ones you see on fill stations and such.Comment
-
both mine have identical cracks as well, theyll be replaced as soon as I stop being lazy and send the reg in to be fixed
Drink WineComment
-
Actually they won't get replaced. AGD don't have any.Originally posted by ntn4502
both mine have identical cracks as well, theyll be replaced as soon as I stop being lazy and send the reg in to be fixed
I canabilized my dynaflows gauges last night so I could tell what the hell my output pressure was.You are the Wormtongue of AO.~bofh
Comment
-
nah I know, I just ment that was next on my to-do list
Drink WineComment
Comment