Logic Paintball Blade Trigger!!

[Mango]

My Logic Paintball Blade Trigger came in today! Coolhand is selling them in the Dealers forum for those interested. I know a good number of people have them but I just want to spread the word.

This is a must for anyone wanting the best Blade trigger for thier E or X-mags. The trigger is very high quality and I just had to post my results here. Installation was a breeze (although I did manage to barely hit the trigger frame a few times with the punch but thats my fault).

Included in the box was a little packet with the two allen keys you need, the grub screw so you can adjust it for manual mode and 3 shims!


Here are before and after pics:

BEFORE:



AFTER:

[wyn1370]

I've got one on mine, but I didn't get allens and shims (I really need some shims in there too).

[Big'n slo]

Very nice! The Logic trigger seems to flow much better with the lines of the Xmag IMO

[Mango]

Wyn your X is humpable. I have yet to see it. When did you get it?

[wyn1370]

Originally posted by SprayingMango
Wyn your X is humpable. I have yet to see it. When did you get it?

when we where in TX, I ordered it through Brad

[Scooter/Cootie]

Re: Logic Paintball Blade Trigger!!

Originally posted by SprayingMango
This is a must for anyone wanting the best Blade trigger for thier E or X-mags.

You must be talking about the TL63 blade trigger then.

Looking good Mango!

[wyn1370]

Re: Re: Logic Paintball Blade Trigger!!

Originally posted by Scooter/Cootie
You must be talking about the TL63 blade trigger then.

I'm sure he would be if timmy would make more

[MicroMiniMe]

It looks like it sits a bit far forward in the gripframe. Is there any issues with fitting big gloved fingers in or comfort? Does it wear on the gripframe behind the trigger at all? Otherwise it looks nice.

[Halliday]

I hope to have my new Logic trigger soon. Now I just have to get my E-Mag back from the AGD board flashing......

[Outlaw5]

Space to run.

Micro....I have a Logic Trigger and it is the HEAT!!!!! I use gloves with my trigger, now my gloves are pretty thin and not any paintball brand but I don't think you will have a problem with the spacing. Additionally this trigger touches the frame in the same places as the stock trigger but it has more adjustment points. The biggest improvement is in the allen screw that adjusts for the trigger rod. This screw will allow you to adjust the trigger rod engagement point and allow you to take out any trigger bounce against the trigger rod for tournaments. It also allows you to place the hybrid/manual trigger very close to the trigger rod for a quick snap and minimal movement. I highly recommend this trigger for everyone who has an E/X-Mag, even if you don't like blade triggers this is defintely a major improvement.

[1stdeadeye]

Looks great!

Wyn-is your trigger black? That would match my baby nice.

JT-how is the installation done. I am a moron when it comes to doing that and don't want to damage the X!

Link to the thread?

[headcase]

Originally posted by 1stdeadeye
Looks great!

Wyn-is your trigger black? That would match my baby nice.

JT-how is the installation done. I am a moron when it comes to doing that and don't want to damage the X!

Link to the thread?

Trigger removal/install is easy.

Take body and battery off of frame.

Elevate frame off of work surface with selector switch down(I use two equal stacks of magazines about an inch apart with the switch between the stacks)

Using a 1/8th pin punch remove the trigger pin. Make sure that the punch is centered on the pin before every hit, or you greatly increase the likely hood of scratching the anno.

Once pin is out the trigger slides right out.

Install is basicly the reverse, except that the selector switch faces up.

I forgot the thread is here

[RRfireblade]

Good for you,enjoy it.

Here's mine for some more reference.




Love mine too and I'd take it over the TL63 anyday.

Jay.

[wyn1370]

Originally posted by 1stdeadeye
Wyn-is your trigger black? That would match my baby nice.

sure is

[Load SM5]

I put mine one and ran it at SC but I'm back to my modified stock trigger for now. It seems to sit really far forward for me. The finish and everything else was excellent but my stubby fingers had a bit of a time with reaching it comfortably.