Trigger Stops for ULT?

[JEDI]

Does anyone make a trigger stop for the ULT trigger? Is it needed? From what I understand, the UTL trigger is lighter, and fires the shot sooner than the regular on/off set up. But if the ULT on/off pin still has to travel the full length (past the fire point) whats the point? Wouldn't a stop help?

[Derman2k]

Ask 'thejester493'. He put a trigger stop on his, Its the only one i've shot but it was nice.

[Wc Keep]

you add a trigger stop like you would to any trigger frame. adding a trigger stop helps make it easier to walk.

[personman]

I just tapped my y frame trgger for a trigger stop, and I sent it to pputowski so he can send it to xpb for gloss black annodizing! yey
I havent tried it yet but I am looking forward to it.

[JEDI]

Originally posted by Wc Keep
you add a trigger stop like you would to any trigger frame. adding a trigger stop helps make it easier to walk.

Hey buddy... Do eleborate. Like I would on any frame? I aint never added no trigger stop to none frames. Is it sompin you can buy that fits on most triggers?

[RRfireblade]

Originally posted by JEDI

I aint never added no trigger stop to none frames.

That means you have added stops ta all trigger frames.

Anyway,you have to drill and tap a hole for a trigger stop screw.You just have to find an accessable location to drill,many people put it on the back of the trigger itself.It varies from frame to frame.

Jay.

[JEDI]

Is it a good idea though? Have there been any draw backs as far as anyone (or AGD) has found? Seems like an obvious step for installing a ULT. Does anyone have any Mag trigger stop pics?.... Guess I'll go search.

[personman]

Trigger stops are good if they are properly adjusted.
logic vert frame

[barberjohn]

logic may be coming out with an adjustable trigger soon for the rtp and am/mm's, so i would be looking for that if i were you. or you can just buy a logic vert frame, and it come with forwar AND aft travel adjustments.

[rikkter]

Originally posted by personman
Trigger stops are good if they are properly adjusted.
logic vert frame

i hope you weren't referring that pic to a trigger stop. thats the trigger rod.

but if you're trying to show what kind of trigger would NEED one, that picture is perfect lol

[trevorjk]

if that didnt work copy paste this link

http://img.villagephotos.com/p/2003-7/302496/triggerpulled.JPG

all i did was put tape on the back of the trigger and its super small and light trigger pull... now i just gotta fix my bolt stick


ill post on that in the next few days probably christmas when i have time to take my mag apart

[badtoyz]

rikkter - there is a triger stop ther just below the triger rod.
I know because i have a Logic Vert frame

[magman007]

rikkter if you look below the trigger rod, there is a stop installed on the trigger

[logamus]

yeah, the logic trigger is great. it has a stop for the trigger rod and for the trigger itself. works like a machine.

[cphilip]

I had a Benchmark grip frame years ago that Warp Sports had installed a stop screw in the back of the frame. The way they did it was to remove the trigger to get it out of the way, and then carefully drill through the trigger guard and then on into the back of the grip frame. Then tapped it and threaded a Allen key screw into that back of the grips frame and reinstall the Trigger. Leaves a neat little hole in the front of the trigger guard and all but makes the access to the back of the frame possible for the drill and tap. Was a good thing on a Benchmark. Not as convinced its needed on a Intelliframe at this point myself.

I for one wish they would add the bottom of the trigger guard hole on those intelliframes to make the grip screw easier to get out. Just had to add that....