warpfeed hopperright bods

[DYE-BaLLeR]

anyone kno where to get warpfeed hopper right bodies?thanks

[Phatty]

Direct from AGD. But they go by warp left and warp right.

[DYE-BaLLeR]

do you kno how much they are?

[Phatty]

My guess would be anywhere between $150-$200. I'm not positive, i have to go to my store tomorrow to order one.

[DYE-BaLLeR]

i dont think they should be that much their just powerfeed bodies with some of the tube cut off

[Phatty]

You should call AGD to get a real price.

[DYE-BaLLeR]

their not open til tues, i just wanted an estimate

[Xzion]

go to www.airgun.com, they have a price list of all those sorts of parts.

[MajorDamage]

For an Emag its like $150(that is if you already own an Emag, or so Ive been told), for a Minimag its like $225, and for Automags...I donno.

ENDO!

[thecavemankevin]

there are two different types. You have warp feed bodies and the powerfeed bodies.

the warp bodies were originally for the emags only, but i think you can purchase them and put them on a regular mag...??? Those types of bodies will only work with the warp because they have had the top of the powerfeed tube cut off, and will only allow the feed hose to conect to the bottom.

Now the Powerfeed bodies will work with both. Say you are right handed with the warp on the left hand side of the gun. With a hopper right body you can run the hose into the bottom of the powerfeed (were the powerfeed plug normally plugs in). Then get an extended powerfeed plug and plug it in in the top of the powerfeed (where the elbow normally clamps on).

The second option is probably the most comen, this way you have a back up in case your warp breaks down. You can get the hopper right bodies from AGD for $100.