Warp on Spyder Shutter?

[Mindflux]

I have a Spyder shutter with a powerfeed that goes up and to the left. I was wondering what all would be required to put a warp feed on this marker. (It wouldn't be for the speed, but for the profile in this case). The AGD store mentions the warp feed they sell only works on airgun markers, so what would I need that's not given in the warp feed box from AGD?



Thanks

[barberjohn]

pbgear sells the ones that are able to go on markers other than mags. they are the ones called pro team warps.

[Mindflux]

For that much money I'd rather not..

[barberjohn]

yea, they are quite expensive, but so is everything else from ptp . i think that the only difference between agd warps and pro team's is the mounting bracket, so i think that if you just buy that strait from pro team products, then buy a warp from agd, then you can mount it, but i am probably wrong. i would try calling agd's customer service, you will get some answers there.

[Creative Mayhem]

The warps that AGD sells are the exact same thing as the PTP ones. The only difference IIRC, is the adapter that come with it, i think the PTP one is aluminum, and the vibration sensor is located in a different place(but i could be wrong on this) Other than that, there is no difference in performance or connectivity. There a few people her on AO that have put warps on ALL kinds of gun, Trina here on AO, put one on her spyder, and it works quite well. Hope this helps.

[barberjohn]

yea, but the agd warps cant be attached to any other gun besides a mag without that iirc, which probably costs about 20 bucks from ptp.

[GA Devil]

Trina has a warp on a spyder I believe. May want to get ahold of her and see what they did and the cost it was to them.

[Creative Mayhem]

Originally posted by barberjohn
yea, but the agd warps cant be attached to any other gun besides a mag without that iirc, which probably costs about 20 bucks from ptp.

The AGD warp comes with an adapter for other guns. You CAN use it with all guns.

[kenndogg]

Originally posted by barberjohn
yea, but the agd warps cant be attached to any other gun besides a mag without that iirc, which probably costs about 20 bucks from ptp.

fits on my cocker and spyder just fine

[Z-man]

A friend of mine has his Spyder shutter with a boyah frame and a PTP warp. Seems to work just fine (minus the money spent on the setup )

[barberjohn]

ahhhh, ok, well, it used to be that warps only fit on mags. i guess im just out of date.

[RoadDawg]

Originally posted by Z-man
A friend of mine has his Spyder shutter with a boyah frame and a PTP warp. Seems to work just fine (minus the money spent on the setup )

I had a shutter once with a boo-yaah. It was pretty nice til I vibrated the frame loose and striped 3 threads on the two mounting frame areas. Will agree that it was too much cash towards a rather stock spyder.

[bryceeden]

Originally posted by Creative Mayhem


The AGD warp comes with an adapter for other guns. You CAN use it with all guns.

My AGD warp fits everything fine, but with Spyders you need a $6 adapter to take standard bottom lines instead of the off set holes.

[deathstalker]

Originally posted by Creative Mayhem
The AGD warp comes with an adapter for other guns. You CAN use it with all guns.

You can't use the AGD Warp, as is, with an AGD no-rise body. Found that out the hard way.

The 90 degree elbow that comes with the AGD one will fit the Shutter's powerfeed just fine.

[personman]

Here is the scoop. The PTP adapter is ONLY FOR VERT FEED GUNS.
If you have any powerfeed, or standard feed (right feed or left feed) gun, then the plastic AGD adapter will fit on it. If you have a vertical feed gun, you have a few options. If you have a ULE body, RogueFactor has an adapter for the plastic neck, that replaces your feedneck, that is very nifty and works awesome (this is what I use). If you have a spyder that needs a vertical adapter/feedneck to attach a hopper on, the clear warp feed adapter that comes from AGD will fit on it. If you have any vertical feed that has a cup or whatever for your hopper (standard vertical feed), then you can get the PTP adapter, OR, you can cut down AGD's plastic adapter so that it fits inside the feedneck. The PTP kit is BS, you pay like an extra $100 for no preformance upgrade, an external sensor, and a stupid adapter, which you dont need in the first place. If you need it, buy the AGD warp, and buy the adapter seperate from http://www.proteamdirect.com

But, to answer your question, YES the AGD warp feed will fit on your gun.