Good Low/No Rise Clamping feedneck.

[Mindflux]

Do any of you have suggestions for a good low/no rise clamping feedneck that doesn't reqire halo/egg sanding? I know there's a few out there... but I'm having trouble locating them. I think maybe check-it has one? Anyone else have suggestions?

Thanks!


Ryan

[ChucktheMAGician]

Not sure on the sanding part, but, http://www.maverickracinginc.com/cgi...d=7179615.4214

[Mindflux]

Hm yes I've heard about this one. it says it's clamping, but I see no clamping portion to it.

[ChucktheMAGician]

The milled part unscrews. It's kinda like a big threaded sleeve. The picture of the black autococker one shows a little how it's 2 parts.

[Mindflux]

Hrmm yeah I sort of see it.

I'd really like to find something that requires no sanding. I tried to call A+ but got an answering machine.

[wyn1370]

you can get one very similar to the A+ from roguefactor
or CCM (http://www.chipleymachine.com/angel.htm) makes a fantastic one, just make sure to call if you want one and ask for an angel no-rise, they only have high and low on the sight
I've got a check-it, but the neck is way too long, had funk mill it shorter than rethread it

[Mindflux]

Rogue's requires sanding. We had this discussion the other night

i'll check CCM

[wyn1370]

sorry I missed the no sanding part
I'm not sure about the check-it, my halos where already sanded

[RoadDawg]

Rogue's requires little sanding or not playing with the screw on part attached. Flyboy was using his with his halo w/o the tightening clamp and it was on nice and tight. I had to sand my Halo to fit my warp anyway so it was no biggy for me.

[Mindflux]

Originally posted by RoadDawg
Rogue's requires little sanding or not playing with the screw on part attached. Flyboy was using his with his halo w/o the tightening clamp and it was on nice and tight. I had to sand my Halo to fit my warp anyway so it was no biggy for me.

Hmm, that's good to know. I'm suprised Rogue didn't mention it. I am really not interested in sanding my loader. I like my equiptment to be as 'stock' as it can be (barring marker upgrades of course). I know they engineered it to be sanded down.. but dang.. if I don't have to, I'm not going to!

[RoadDawg]

I hear ya. My tsa also needed to be sanded but it fits real tight w/o the clamping part. I think Rogue is unaware of this, that is probably why he didn't mention it.

[Rynoboy06]

My old halo shell required significant sanding on my feedneck and my new one fit perfectly on the exact same neck. So there may be some variation between halos.

[-=Squid=-]

https://www.chipleymachine.com

They make excellent feednecks, which if I recall do not require sanding of the feedneck. I wouldnt recommend the A + or roguestyle feeds, they really arent that great unless you want your hoppe to spin around, or you want to put your hopper in feedneck all goofy.

[Tron]

Get the checkit works extremely well.

[-=Squid=-]

Originally posted by Tron
Get the checkit works extremely well.

Yes, check it is nice as well, but I would only recommend if the chipleys were unavailable.