Question about Nitro system and regulators?

[oSnypero]

I plan on upgrading to a Nitro sytem real soon, most likely
a 68ci/4500psi with a preset of 850psi with a ANS Gen-X regulator. My question is, With a regulator do I need to adjust the regulator to the same output pressure as my nitro tank, in this case being 850psi?

Any info will help, thanks

[Dayspring]

First question is, what gun are you putting this on? If it's a mag, you don't want the ANS reg.

The tank counts as one regulator and the gun is #2.

Ditch the regulator if it's going on a mag.

[deadeye9]

Most regs require a 200 psi difference between output and input pressures, to work effectively. With a 850 psi preset, the highest reg output pressure would be around 650 psi.