Warp Adaptor for VF bodies

[tyrion2323]

Hi guys - here's a thought I had about making an adaptor for slugg bodies, such as the Dallara / Karta (since they are my favorite milled bodies!)

It would screw into the VF port like a high rise, and would have angel threadings; however, it would angle downwards, like the old warp bodies.

Here's a picture

[laxkid]

that is a really good Idea to bad I have a warped mini vertibrate you should try that with cocker threaded too alot of people would like it

[RRfireblade]

It's been discussed before,there's just doesn't seem to be enough warp users to justify it's production.RogueFactor makes a threaded neck that accepts the 90* warp adapter directly.That's about as close as it gets.

[personman]

Roges adapter > you

[tyrion2323]

Rogue's adaptor doesn't address the issue of having that large, bulky 90* adaptor as well - basically it's just an adaptor for an adaptor. My adaptor would look basically like the old SS warp bodies, and would reduce the profile even better.

[RogueFactoryKid]

Prove It!

[tyrion2323]

Here is the proof. Thanks to my trusty Microsoft Paint, I whipped up this comparison. I'm not bashing Rogue's adaptor, I'm proposing ideas for a new one.

[personman]

Right now, Rogue's adapter is the best solution out there. Big bulky 90* adapter. Big deal, guess what? Your adapter isnt going to be much better unless you find a way to make a paintball smaller temorarially while you shove it through a pin sized hole so you have a smaller adapter. The size of the adapter is limited to the size of the paintball. If you made a screw in alumminum one, you would save about half an inch. Big deal, not worth the money. You can spend 10 on rogues adapter or 40 on this little gizmo. I would also like to note that the adapter has such a low profile (besides being so tall, I mean thickness) that it is pretty hard to hit, and I dont think 1/2 of an inch is going to make a hell of alot of difference.
Now, I'm not saying its a bad Idea, but it's impractible, if you can get what I'm saying...

[tyrion2323]

proof

[tyrion2323]

proof with hosing attached.

[tyrion2323]

ack - here is the hosing bit

[personman]

Good arguement, but not completely true.
With RogueFactor's adapter, the 90* is completely flat against the body. You have a space, which is wrong.. and unfair.

[personman]

Even with your hose drawing, you can see that the difference between the two wouldnt be enough to justify the price, IMO. However, you may feel different about saving 1/2" off the top of your gun, I am just pointing out things here.

[RRfireblade]

I also don't think your feeding paint reliable at that much over 90*.

[smilestyler]

To me it looks like it wouldn't thread on either. The feed tube would hit the side of the body before the first turn.