ULT in retro valve

[ridn3wheel]

i have a retrovalve and i hear the ULT wont work in it and i hear it will but will work better in the X-valve. i thought the x valve was only ligher. i have a lv10 bolt too... please insite...

[Hexis]

There is a slight difference in the on/off area between most ReTro Valves and the XValve. The XValve on/off has a two o-ring top (more importantly the valve has room for the two o-rings). The ReTro on/off only has the inner o-rin on the top, since the space for the on/off is steped in on the top. The extra space in the XValve is required for the ULT.

[ridn3wheel]

so it wont even fit?

[Dayspring]

It's a possibility.

Only way to tell is to look at your valve.

Take the on/off assembly out. If you see one oring, it won't fit. If you see two, it will.

[ridn3wheel]

i have a retro on/off that looks like this will it work? i dont understand..

[danheneise]

as dayspring said, take the on/off assembly out, look into the on/off chamber and see if there are two o-rings. looking at the on/off assembly won't help much.

[ridn3wheel]

i only have 1 o-ring as on top o fthe on/off assembly

[Dayspring]

Then you'd have to get your valve milled to accept the ULT.

Otherwise, you can't use it in your current valve.

[ridn3wheel]

well how fast does the ult recharge? pressure/speed how fats is it actually able to shoot. i have a 68/4500 flatline tank and intelliframe.