Lenses, Mask, Anger

[magman007]

believe it or not the actual time for chsnging a v force lens is 4.6 seconds, damn thats fast!

[DJTmRave3]

Like stated above, do the nose first. Then move away from the nose and up to the top. They should slide in easy after the first 3-4 are in. Is this the first time you changed lenses in the mask? If it is, then that is the hardest time. It gets easier after this time.

[Cha0tic]

do not use a flathead screwdriver. the metal will scratch up the lense. use a JT barrel plug.

once you get it down it isn't that hard.

[cphilip]

Originally posted by MAGBOY
Hot water on the rubber.

Ummmm...Errrr...Now how am I suposed to Moderate that?

[xmetal2001]

I finally got it, i've just been letting it sit there all week. I came back to it and i got it in within 5 minutes. Just in time too, i have a tournament tommorow(yeah, this was my first time changing the lenses.

[ReTroMagBoy]

get a exacto or razor or knife, and lengthen the lens retention slips on the rubber goggle frame about 1mm.....

[RiceRocket]

it gets easier the more you change the lenses. my advice would be to change them during the warmest part of the day, the rubber softens and stretches. i usually start with the nose part and work my way around, the last retention to be put in is the middle top one. good luck in your tournament.

[Muzikman]

That is the whole reason I bought 6 of the Scotts Bad Boys when they where $20 each at 888paintball. Who needs to change lenses at that price? Just throw the mask away and pick up the next one. Figure I'll be running out in about 3 or 4 years.

[Snap_Dogg]

i can change my flex 7 lense in like 5 min but thats not rushing i just take the whole mask apart witch is easy and then when u have just the like ski mask its easy