Newer Software??? 4.0???

[Miscue]

Hurm, maybe you're having the solenoid wire backwards FA issue. Did you have 3.2 before?

[RoadDawg]

Nope I had 1.37. I'll mess around with it some more and then report.

[Miscue]

Ok, you probably need to reverse your wires. It runs away a bit with trigger held, correct? If so, swap wires.

[lamby]

Miscue,

on my trip to AGD this week I am going to pickup some sacrifical burst jumpers to create my data cable (darn those prototype cripers are expensive for the 1.25mm connectors). Would you be willing to email me the code so I could compile it and flash some local mags? I would promise to not release the code and would sign whatever you need for copyright purposes.

It sounds like you did an excellent job on the code. What did you use, c, c+, C++, C#, basic, or assy?

I will talk to AGD to see if we can beta test it for them on our markers either may it would be nice for someone in Milwaukee to have flashing cababilitys

Thanks,

[Gadget]

Originally posted by Mickster
Hi,

Im from the UK and was wondering how much it costs to get the new software as i currently only have 1.37.

Cheers

Mike

Mike,

Give John + Jackie a ring at AGD-E and ask - John didn't charge for my upgrade from 1.37 to 3.0. If you're not within driving distance the shipping might make it expensive though.

I'd wait till v4 is officially released though, at the moment they'd flash it to 3.2.

[fcpchop]

ok i dont like reading the rest of the thread, i got to like the mid of 2nd page, so the big question on my mind is if i send in my gun will they put in 4.0?

[headcase]

Originally posted by fcpchop
ok i dont like reading the rest of the thread, i got to like the mid of 2nd page, so the big question on my mind is if i send in my gun will they put in 4.0?

Currently, NO, later, Probably.

4.0 is still in the testing stages, it has not yet been approved for wide release. It looks like it will eventualy be approved, but who really knows?

[BlackVCG]

Originally posted by Duke of Lawnchair


Miscue,

I just mic'd it.

Verdict:
3.015"

Jim

3.010" is the spec length from the top of the arm that the clevis for the plunger attaches to down to the tip of the plunger.

If it's too long, it will wear the sear prematurely and if it's too short it will hit the bottom of the on/off assembly and damage it.

[cphilip]

...but thats only two and a half pubic hairs too long right?

[Gadget]

Depends how thick your pubic hair is

[Miscue]

Originally posted by lamby
Miscue,

on my trip to AGD this week I am going to pickup some sacrifical burst jumpers to create my data cable (darn those prototype cripers are expensive for the 1.25mm connectors). Would you be willing to email me the code so I could compile it and flash some local mags? I would promise to not release the code and would sign whatever you need for copyright purposes.

It sounds like you did an excellent job on the code. What did you use, c, c+, C++, C#, basic, or assy?

I will talk to AGD to see if we can beta test it for them on our markers either may it would be nice for someone in Milwaukee to have flashing cababilitys

Thanks,

Nobody will ever have the source code except me and Tom. Also, this is Tom's code and not mine... it is not mine to give. Once again, it was written in assembly.

The hex file to flash boards with, is a different story... and I don't know what the word is on that.

[Curly]

Well, we all know that the hick himself, BlackVCG is going to try and hack the gibson to steal the source code.

[Mickster]

Cheers Gadget

Sounds good, have to post itme thinks, maybe im bein slow but when is it being released here?

Cheers

Mike

[hitech]

I am still skeptical of the ROF numbers I’m getting. Miscue, how do you determine the MAX ROF number again?

I’ve never considered myself fast. Normally I just pull the trigger with on finger. With 4.0 I have tried out of few techniques. Here is what I got:

1. Just pulling the trigger with one finger = 7 bps
2. Fanning = 10bps
3. Hitech’s odd walking technique = 10bps
4. Raking the center hump = 13 bps
5. Manike’s raking technique = 20bps once, normally 18-19bps

This is without air (my wife hates it when I shoot in the house ). I turned the solenoid off to insure I wasn’t getting any solenoid/HES “bounce”.

With manike’s raking technique it wasn’t hard to consistently reach those numbers. If I can really fire paint with those numbers I’ll impress myself.

BTW, it did not seem to matter if the ROF cap was set at 20 or 26. Personally that speaks volumes for the software. I think miscue did a great job, and I write software for a living.

[Curly]

Hitech: Those numbers seem perfectly good to me. I know that I can get at least 14 walking a timmy with no air and no bounce, so you walking 10 sounds fine to me.