Halo making a weird noise.

[paintball_junkie]

Well the story goes something like this. I was chopping all day and my halo got so clogged up with paint and paint shells it barely spun. So being the master tech I am and never even taking the shells of my halo before I dug into it. I took off the shells then unplugged the wires and took the whole feed system out. Then i procedded(sp?) to take the little clear wheel offand clean stuff out from under it. I get all reassembled turn it on it spins fine but its makin some badger noise like "chunkity chunk chunky chunk". Well to get to the point I heard something about preloading the spring or something and i wanted to know if thats what wrong. Also is there any kind of online manual I can download?O almost forgot its just a plain ole Halo B.

[speedyejl]

Sounds like thats your problem you need to retension the spring before you put the drive cone back on. Go to OPPs site and read the directions for installing a rip drive, it has a pretty good section on putting the drive assembly back together.

[paintball_junkie]

Do you ahve links to the website?

[speedyejl]

Comeon this is for your own sake try to learn to use the mythical google

http://www.odysseypaintball.com/

http://www.haloloader.com/

[paintball_junkie]

Ya i just found it when you posted, thanks for the help.