I need to know how much this cocker is worth...fast...

[member#10,261]

I know nothing about cockers, but this guy wants to trade this cocker for an E-Piranha of mine...
-2K1 Autococker (black)
-Shocktech Supafly Bolt (delrin)
-ANS JackHammer LPR (silver)
-ANS 3-way (silver)
-ANS Ram (silver)
-Pneumatics has kickass PINK hoses!! (gives the gun uber-flow!! lol)
-Freak barrel back (black)
-Dye trigger frame (silver)
-Dye stickies (black)
-2K1 A/C reg (could get a WDP speed minireg if deal is good enuf)
-New rods and hoses
-New trigger shoe (silver)
-New cocking rod
-Beavertail (chrome)

[member#10,261]

here is a pic

[CoolHand]

I'd say between $350 and $450.

You couldn't build it again for less than $550, so it would be a good deal at $400, unless it is torn up.

It is right feed though (I can't stand elbows ), which is a strike against it.

But if you are OK with that, I'd say you'd be fine giving that for it.

If it tickles your fancy, snag it.

[member#10,261]

how much do you think i could sell it for?

[CoolHand]

Like I said before, you should be able to get $350-$450 for it.

Slightly less on EBay.

[member#10,261]

cool thanks bro, I could prob sell it here for 200 pritty fast then

thanks

[LeatherPants]

Originally posted by CoolHand
I'd say between $350 and $450.

You couldn't build it again for less than $550, so it would be a good deal at $400, unless it is torn up.

It is right feed though (I can't stand elbows ), which is a strike against it.

But if you are OK with that, I'd say you'd be fine giving that for it.

If it tickles your fancy, snag it.

If you're lucky you can get $300 for it. It honestly looks like 99 body.

Going against you:
1. Slide trigger
2. RF not Vert
3. ANS parts
3.

[nastymag]

it has a 99 back block from the looks of it only. ( you can use a pre 2000 back block as long as you also have a pre 2000 bolt)
on 99 there was no milling on the side oppisite from the cocking rod thingy( i can think of the name right now ).

so its 2000 plus body

[LeatherPants]

Ahh. I just noticed the back block and was like hmm someone is gettin screwed.

[PaInTbAlLeR476]

Deffinatly not 35-450, i started my cocker at 350 and its vert, and has many more upgrades than that gun. I had a VERY hard time getting any offers, had to try 3-4 times, but i sold it localy for 450. I would say 300 TOPS for that gun.

[FalconGuy016]

For an e piranha?

Technically that cocker should be for a good amount of money, but I've seen nothing but trouble for people trying to sell cockers within their worth for the last...year or so... I guess.

[RusskiX]

It is a 2K+ body with a '99 back block and bolt. As said previously it has a couple of strikes against it for resale: right feed, slide trigger, ANS pneus. But I think you should be able to get $250 resale relatively quickly. Consider that new 2k3 VF can be had for right around $300 and price accordingly lower.

Good luck!

[member#10,261]

all i would need is 200-250, and it sounds like i could do that fairly fast.

thanks for all your help guys

BTW-it dosen't come with the egg or complete freak system

[punkncat]

I have seen mech cockers similar to that selling well below 200$.
The mech cockers are just way down in resale right now.
It definately has a pre 99 backblock.The body itself is 2K or newer.
Just built a cocker with a bunch of parts out of peoples closets....just asked around at the field and everyone donated a piece.I have 5$ in it right now, and the only thing left to buy is the 3way timing rod.
It has System X (timmy) main reg, Palmer STB LP reg , ANS ram, bomb 3 way , Dye hinge , Rat 3:16 valve, CP Flame drop w/ on/off, Armson stealth barrel, on a 99 body.

[RRfireblade]

$200-$250max.