AGD really did make an 8 hole mod

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Puddleglum
    Registered User
    • Oct 2001
    • 811

    #1

    AGD really did make an 8 hole mod

    It is the PMI Perfect Charger. I'm looking at one right now. Let me see if I can get a pic. It says:
    Perfect
    CHARGER
    manufactured by Airgun Designs
    for PMI Pursuit Marketing Inc.

    So I guess this in one aftermarket part that might work well. Since its manufactured by AGD. Does anyone have any idea of the MSRP?
    I have no Sig.

    Good Traders
    ________________________________________
    billybob_81067, Jon/XPM
  • Xzion
    Official Dragon of AO
    • Jan 2001
    • 1617

    #2
    The 8 hole mods do nothing, espcially for current valves, the idea behind the 8 hole mod was with the older valves, the holes in the regulator and the power tube portions of the valve didnt always line up and caused some restricted air flow, the 8 hole mod was done to ensure at least ONE of the 8 holes lined up, but now, theyve fixed that problem, and the holes now always line up, leaving 8 hole mods a waste of time and money.

    View My Mags

    "Think First, Think Fast, Be Careful, Pursue. Be Great."

    Comment

    • BlackVCG
      Grubby Owner

      • Oct 2000
      • 4956

      #3
      AGD has them machined for PMI so at least they're built to spec. It still doesn't do a damn thing for the gun, but at least when they get the gun sent in for repairs, they know that even though it has an 8-hole mod, it isn't something that can be causing a problem since it was built to their specs.

      People generally don't listen and will continue to buy 8 hole mods, so AGD has them machined for PMI so at least there's less crap aftermarket parts out on the market. Especially when it comes to reg. bodies. Most people lose the original reg. body so all they have is that aftermarket 8 hole mod. When AGD finds out it's a problem with an improperly machined 8 hole reg. body, they can't do much about it. At least there's one out on the market that AGD doesn't have to worry about if the gun comes in for repairs and has one.
      My Feedback

      Comment

      • Doobie
        AOsOfficialDrillSergeant
        • May 2001
        • 1237

        #4
        So, this would be a good part for someone with an older mag, right? I think all the mags after #30000 ,or close to that, line up. Anyone know the right Ser#?

        The gun is 1/8" of a game that is a FOOT long!
        (...but a 'mag helps)
        I know I was born and I know that I'll die...the in between is mine. -Eddie Vedder
        Sinister Sainthood

        Comment

        • Tunaman
          Specialized AGD Tech

          • Dec 2000
          • 8643

          #5
          I think you have to go alot lower than that...I say 8000 and down. Maybe lower...like 3000. Probably talking level 6 here.
          Last edited by Tunaman; 12-11-2001, 05:54 PM.
          Email me for low prices on ALL AGD Products and more. [email protected]
          Tunamart

          Comment

          • Cha0tic
            g0t mag?
            • Feb 2001
            • 1990

            #6
            all automags past serial number cf3456 are level 7, and all minimags are level 7. this is taken straight from the handbook. this means that they do not need an 8 hole mod.

            Comment

            • Doobie
              AOsOfficialDrillSergeant
              • May 2001
              • 1237

              #7
              oops, extra zero, thanks guys!

              The gun is 1/8" of a game that is a FOOT long!
              (...but a 'mag helps)
              I know I was born and I know that I'll die...the in between is mine. -Eddie Vedder
              Sinister Sainthood

              Comment

              • Puddleglum
                Registered User
                • Oct 2001
                • 811

                #8
                Man, I was hoping to have something good. But I do know that the 8 hole does nothing.
                I have no Sig.

                Good Traders
                ________________________________________
                billybob_81067, Jon/XPM

                Comment

                Working...