*sigh* Here we go again, I need help on pickin out a gun...again

[tyrion2323]

Omen. I would recommend an Evil Omen. They are EXTREMELY well priced. They perform excellently (25+ bps with the PDP Chip) and are simple and easy to maintain!

In terms of a 'cocker, I would recommend a Hybrid Paintball Quest Numatix. With great milling, super customer service and all the extra's you'd want, it's a steal!

I still recommend a Dragun TES, but you're not a fan of them.

Jacob

[Steelrat]

Viking, but wait until the detent issues are ironed out. AKA is trying out a new detent design with the 04s, and they had some initial problems with small bore paint. Cudos to AKA for trying something new. They have acknowledged the problem, and are working on a fix. In fact, I am a beta tester for the new bolt design they think will fix the problem. Once they implement the fix, they viking will be as good as any other gun out there, and probably better than any on the list. And very hassle free.

I also like the cockers, mainly eclipse, freeflow, and jackal. Just make sure you get an eblade, as that eliminates many of the timing issues. Still more work than a viking, but not too bad.

[GT]

Re: *sigh* Here we go again, I need help on pickin out a gun...again

Originally posted by SuiciDal Sn Y p ER
Here are my choices:
2004 Viking (milled of course) - obo $1,300
2003 Dragon Intimidator (WAS 2.7, WAS eyes, shocktech parts) - $900
2003 Angel Speed (Halo B, 68/45 Stubby, 10" CP 2 piece barrel included) - $900
2003 Eclipse E-Bladed Autococker (NEW) - $1,300
2003 ANS GX-4 Autococker (NEW) - $550

The only one on that list I would go with is a viking. If you buy a cocker dont fall into the aftermarket cocker crap hyp, go with the superstock. stock 2k3 w/ an eblade for 650 from pbgear, or an emag. all that other stuff is just crap..

[FallNAngel]

Re: Re: *sigh* Here we go again, I need help on pickin out a gun...again

Originally posted by gtrsi
If you buy a cocker dont fall into the aftermarket cocker crap hyp, go with the superstock.

Actually, it's not just hype. The last thing I want is an LPR and HPR that isn't externally adjustable and a ram with internal seals that have more drag than they need. Does this mean you should spend tons more for the milling of an orracle? Not unless you really want it. It doesn't mean there aren't better parts than stock though

[MMM]

Viking or e-cocker. We have had (and still do) several of both. The Eclipse was wonderful, I'd get a pink lady if I didn't feel hugely guilty about dropping $1600 on a cocker although if it was right in front of me I'd still probably buy it. If you haven't much mechanical luck go with the Viking. I have a featherlite and my husband a Crusader, I can work on and trouble shot them easily. They offer familiarity courses at the events they are at for free and their master tech is super helpful.

AS for the custom milling realize that almost all are done by one man (not just one shop but a one man shop) so you'll have a stupid long wait. But you're on AO and everyone here is used to that!

[FallNAngel]

On the other hand, there's only 24 Pink Ladies out there, making it even rarer than the SFL E-Mag

[bunkermaster10]

Ummm I say go for the 2003 Eclipse E-Bladed Autococker cause there are so damn pretty and fairly easy to use. If you want something that will never mess up just get the angel. Get the A4 though. You can get em' for about 1099 now. Just flip a switch and ur ready to ball all day with no problems.

[Grasshopper]

I'd go with the Vikings. I've had nothing but good experiences with them.

[Ov3rmind]

Originally posted by Mindflux


Milling.

Why would you pay 1500 for an Intimidator?

Milling.

There is only one Viking that I know of over $1300 (Highlander I beleive), at which point you could by an Excalibur. Really no point to it IMO, especially when it's no better than any other custom Viking.

[yeahthatsme]

Originally posted by FallNAngel
The thing holding me back from Angels is there's no real reliable form of anti-chop (no, Sensei isn't as reliable as an ACE)

warped sports installs ACE on angels


i have a speed and i love it(PLUS its for sale ) so i'd suggest a speed or an a4 if you want to spend the extra money.

[SpecialBlend2786]

Dark Cocker?
Nexus Cocker?

OR just pick up the Timmy.

[speedyejl]

[sneakyhacker420]

wait for the half-milled 2k4 vikings to come out... and then buy one

[bryceeden]

OK, I am going to say cocker, but look here www.endlesspaintball.com to find out how to time it, if you buy it off the net it probably won't be timed.

[mxkop]

Personal preference!

Don't go for what someone else THINKS is best for you. The best approach to picking a marker YOU like and will be happy with is to handle and shoot them all if possible. Then and only then make a decision based on your own evaluation of each. Your the guy who has to be happy with your purchase. Not any of your buddies.

On another note, from my own personal experience I have found that the ANS series of Chaos cockers to be among the very best of the breed. I've owned several different brands of autocockers including high end WGP's and without a doubt the two ANS markers that I have are by far the best cockers I've ever owned. I currently have a GX-e and a GX-4. I'd also like to mention that ANS has perhaps the best customer service in the paintball world.

Don't let anyone else influence your decision. Handle the markers you are considering, shoot as many as you can and then and only then make up your own mind!

mxkop