drop won't fit
hey guys I have a minimag with a y-grip and a deadonpaintball x-chamber. The problem is that no drop forwards will clear the x-chamber. I really will need a cradle or drop of some kind because I'm getting a 88/4500 Nitroduck tank. Should I get a new fore-grip or are there other solutions. Does anyone else have this problem. (also I don't run my hose through my x-chmber. It goes directly to the valve) ANY help would be nice.:)
-
Minimag
retro valve w/lvl 10
Y-grip
warpfeed(12v x-board feeding it)
centerflag preset(subject to change) -
I just had an idea. Can't I just take the vertical asa off my minimag and put a 15 degree one. Would that work? Does the ASA on the stock minimag rail actually come off?Minimag
retro valve w/lvl 10
Y-grip
warpfeed(12v x-board feeding it)
centerflag preset(subject to change) -
first of all if you want a new foregrip, dont get an expansion chamber. They just slow down the flow of your air, and if you have nitro it's pointless. just get a gas thru or a regular foregrip and go straight to the valve.I knew not what I did but am now edumacatedComment
-
what is the shortest gas thru grip to get?Minimag
retro valve w/lvl 10
Y-grip
warpfeed(12v x-board feeding it)
centerflag preset(subject to change)Comment
-
a hollowed out angel minireg
we do that
dont even do a gas thru, just hose it w/ a 1 footer!
I do know the AO sig rules, I just want a free sig pic, that's all! :mad:
My Gun CollectionhAppy's Official B/S/T thread - FeedbackComment
-
where can I get that? Aren't you not supposed to have too many regulators on your gun? Any other suggestions?Minimag
retro valve w/lvl 10
Y-grip
warpfeed(12v x-board feeding it)
centerflag preset(subject to change)Comment
-
gut out the minireg, or dont use it as a gas thru
I do know the AO sig rules, I just want a free sig pic, that's all! :mad:
My Gun CollectionhAppy's Official B/S/T thread - FeedbackComment
-
CP makes a teenie gas through, and you were right, the 15* ASA would help out. Take off your body and you'll find a screw that holds your ASA inplace...directly above the ASA of all places! :)Comment
-
I dont think that is true for the pressures we run..Originally posted by toyotaboy12
They just slow down the flow of your air,
Personally I would go with an Omega or Rogue foregrip. Light and no need for more gas fittings to leak.
Check out my how to build a mag thread. that mag in my sig has an omega foregrip. its a little shorter than the Y frame and you should be able to stick with a small drop.Last edited by GT; 02-05-2004, 04:31 PM.Comment
-
Originally posted by gtrsi
no nead for more gas fittings to leak.
... stich with a small drop.
nead? stich? thats badCurrently the 186th top poster on AO!!
member# 13650
Feedback :)
"... i splooge when i touch it :D
~UltimatepaintballerComment
-
Originally posted by dinger
nead? stich? thats bad
some people type fast and mess up sometimes, atleast he was contributing to the thread.
look into a CP or ROGUE foregrip they both look nice and should fit with a drop.[*img]http://www.browndotdesign.com/Xodus/AO/YeahThatsMe.jpg[/img]
Image too large- TatoComment
-
What is shorter, a cp foregrip or a rogue grip? Thanks.Minimag
retro valve w/lvl 10
Y-grip
warpfeed(12v x-board feeding it)
centerflag preset(subject to change)Comment
-
Cute,nead? stich? thats bad
This would be one of those reasons why some people do not try to help out....
Cp is a gas through. It depends on what size VA you got.What is shorter, a cp foregrip or a rogue grip? Thanks.Comment
-
I stripped that screw, anyone know how to take it out?Originally posted by xXhAppyAznXx
gut out the minireg, or dont use it as a gas thru
Where to get 15* ASA's and miniregs?Milled,Stripped, and Polished AMG LCDComment
-
Here, check it out: Rogue Grip on a AM/MM rail with Y-Grip.
Red/Black Freeflow Lotus Racegun
Red/Black Acid BPS Twister Cocker
Bright Black Y-Grip/Warp ULE Mag
Blue 99 Dark Angel w/Matching Accessories
Matte Black Stock Class Sniper 2
Feedback: http://www.automags.org/forums/showthread....&threadid=94972Comment
Comment