ULT in my classic

[GT]

just installed into my Killer Klassik project. I am headed out to do alittle feild testing today.

Thus far the trigger is almost walkable. I think the big problem so far is the weight of the benchmark trigger combined with the amount of force the on/off puts on the sear tends to slow things down abit...

[speedyejl]

You'll have better luck being able to walk the trigger if you get a RT style setup.

Basically just pick up an RTP rail and sear.

The sears have brushings on them so they have alot less friction.

[GT]

speedyejl: I had the same thought. although the big problem for me right now is the side to side slop in the benchmark. I love that frame! maybe i can get a stock am/mm milled for the rtp sear after I shim up the benchy!


I feild tested today. Played with my works for about 2 games and then picked up the mag. I ran it over Big Red and got right at 10bps. if I realy railed on it for more than 5 shots i would get one that would drop about 15 ft in front of me. I am going to give another shim a try. Otherwise it was a great gun all day. It is very strange to use a mech gun that has a nearly electro light trigger. Little side note you absolutly must have excellent trigger technique. If you dont you will chuff the hell out of the classic valve.

[speedyejl]

Yea that and a logic frame, they have trigger stops so you can get the absolutly shortest pull.

[GT]

Originally posted by speedyejl
Yea that and a logic frame, they have trigger stops so you can get the absolutly shortest pull.

I am not a big fan of short triggers on mech guns. I just want to make sure where it stops and starts. there are a multiple number of guns that have supre short triggers that are way to easy to short stroke.