adjustable feednecks?

[phantomhitman]

i am about to order an adjustable feedneck for my marker to get all of the parts ready to be annoed. It will be angle threaded (dallara body), so keep that in mind. I have seen the choke chain and the ccm no rise. Can anyone throw in an opinion on these 2 necks or suggest others?

thanks for everyones help. my mag is coming together great, the scepter barrel kit should be on its way now.

[melster]

Well, there's the Rogueneck. I have that one and the CCM Low rise. I personally like the CCM better because it's easier to get it to grip tightly. I also use a sight, so the low rise helps my hopper to completely clear the sight.

I bought my CCM neck from toolbott. I can't confirm that it is in fact angel threaded, but he did say it fits ULE bodies. However, it initially fits really loose...I can literally shove the neck down the feed neck hole without screwing it in! However, the threads do catch, but if I tighten it down too much it might strip the threads.

In contrast to this, the Rogueneck fits the threads perfectly. Unfortunately, it lets my hopper hit my sight and doesn't clamp as tightly as I'd hoped.

[phantomhitman]

thanks for the feedback. i am worried that the rogueneck wont hold tightly either, that is why i want an adj feedneck. and what you said about the ccm scares me also.

[melster]

Well, like I said, I'm not 100% certain it's angel threaded. I've hand tightened it down right now, and it fits tight and feels solid. You can clamp the neck onto your hopper so tight that you can use your hopper to unscrew the neck from the body.

I think I'm going to buy some blue loctite and loctite the neck down. Mind you, it feels plenty tight right now, but it never hurts to be sure.

[phantomhitman]

gentle bumps into thread,walks away whistling

[GA Devil]

I run the check-it low rise and love it

[RT pRo AuToMaG]

I have a CCM Lorise for my matrix and I love it.

[MicroMiniMe]

A+ ULE No-Rise clamping feedneck

Works good enough that I use two.

[phantomhitman]

i am liking the ccm more and more. it actually has an allen screw to tighten it, something I am definatly interested in. thanks for the help and opinions so far, keep posting more.

[pb4jc]

RogueNeck!!!

I got one word r0x0r!!!!!! i love this thing. My egg II did require a bit of sanding but once i got it on there it holds that baby nice and tight. I would definitely reccomend this one as apposed to the CCM style ones. Just my two cents.

[pputkowski]

One Word, Rogueneck

[ClassicMagger]

Hey:

I have had personal experiences with both the CCM Feedneck and the RogueNeck as well as the Choke Chain.

My opinion of each:

CCM Feedneck as stated above is loose when on the ULE body. I have had some problems with it when running up the field. Personally not my favorite.

RogueNeck has been a great feedneck for me. I can tighten it down with as much torque as I want. It works awesome. Never loose and is great quality. Personally what I use now and not planning on taking it off.

Choke Chain have had problems with it loosening when I have a hopper in it. Just too much jangle from the gun I suppose. It loosens up too easily. Personally the worst out of the three.

Hope it helps bud.

ClassicMagger

[Magglerock]

Phantom

Remeber though, you won't be able to get a no-rise from CCM, only a low-rise, as they make them for angles, and angles don't work well with no-rises. If you're running a Halo, you'll want the no-rise; they feed better with a shorter stack. I have a brand new A+ paintball no-rise clamping neck for sale; its still in the package. Its black. PM me if you want it.

[sslecyk03]

i havent had any experience with either the rogueneck or the ccm but i can say that the ccm no rise looks absolutely pimp.

[pputkowski]

Originally posted by sslecyk03
i havent had any experience with either the rogueneck or the ccm but i can say that the ccm no rise looks absolutely pimp.

RogueNeck is the definition of PIMP